Fisher Paykel BE1-36RCI-N handleiding
Handleiding
Je bekijkt pagina 27 van 52
25
INSTALLATION
2
Unpack ceramic rods
and remove radiant from
the unit
.
1
Locate the radiant in
the unit.
3
Unlock radiant end cap
by pushing it up with
two fingers.
5
Lock radiant end cap.
6
Place the assembled
radiant into the unit.
4
Place the 18 ceramic rods
onto the radiant.
If a ceramic rod breaks
1
Unlock the end cap by pushing the two tabs outward. This can be done by inserting a thin
rigid tool, e.g. screwdriver, between the ceramic rods from the inner side of the radiant tray
(LPG). For natural gas, push the radiant tray up with two fingers.
2
Replace broken ceramic rod.
3
Lock radiant tray end cap.
Radiant Tray Assembly
Natural Gas
LPG
2
Place the 18 ceramic rods
onto the radiant.
1
Locate the radiant in
the unit.
3
Fit and push down the end
cap over the radiant tray
edge to secure.
6
Place the assembled
radiant into the unit.
4
Lock radiant end cap by
pushing the two tabs into
the radiant tray.
To order a replacement ceramic rod, please visit www.fisherpaykel.com
Bekijk gratis de handleiding van Fisher Paykel BE1-36RCI-N, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Fisher Paykel |
| Model | BE1-36RCI-N |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 6388 MB |
