Fisher Paykel BE1-36RCI-N handleiding
Handleiding
Je bekijkt pagina 14 van 52
12
INSTALLATION
Clearances to non-combustible construction*
A minimum of 76mm clearance from the back of the grill to non-combustible construction is required
for the purpose of allowing the hood to open fully. It is desirable to allow at least 153mm rear and side
clearance to non-combustible construction above the cooking surface for counter space. If you’ll be
using the rotisserie option, at least 180mm side clearance is essential for the rotisserie motor space. The
grill can be placed directly adjacent to non-combustible construction below the cooking surface (Fig.
02).
Note: if intending to use the rotisserie, the minimum clearance will be from the rotisserie motor instead
of the side of the grill.
Locating Built-in Clearances
General
The grill is designed for easy placement into built-in masonry enclosures. For non-combustible
applications the grill drops into the opening shown in Fig. 05 and hangs from its side flanges. Adeck
is not required to support it from the bottom. When using the insulated jacket in a combustible
enclosure application, see the Fig. 06. The insulation jacket assembly must be supported from the
bottom by a ledge on each side and back or a solid deck.
A spirit level should be used to ensure that the unit is level both front-to-back and side-to-side. Ifit
is not level, burner combustion may be erratic or the unit may not function efficiently for grease
flow. If the floor is uneven, re-leveling may be required whenever a freestanding unit is moved.
*DEFINITION OF NON-COMBUSTIBLE MATERIAL - Material which is not capable of being ignited and
burned, such as materials consisting entirely of, or a combination of steel, iron, brick tile, concrete,
slate, and plaster.
IMPORTANT!
y Failure to maintain required clearances creates a fire hazard that may result in property damage or
serious personal injury.
y The grill is designed to function in an open area. Recommended minimum clearances should be
maintained to all surfaces (combustible and non-combustible) for optimum performance. Non-
combustible material within the minimum clearance area could result in discoloration or deterioration.
y If a non-combustible material such as stucco is covering a combustible material such as wood, the
minimum clearance distance needs to be considered for wood. The presence of a non-combustible material
inside the clearance zone does not eliminate the minimum clearance zone to combustible material.
FIG. 02
PRODUCT DIMENSIONS MM
A
Minimum distance from non-combustible surface to grill
76
B
Minimum clearance from non-combustible surface from
top of grill lid while open
610
NON-COMBUSTIBLE
SURFACE
=
A
A
A
A
B
A
B
b
Bekijk gratis de handleiding van Fisher Paykel BE1-36RCI-N, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Fisher Paykel |
| Model | BE1-36RCI-N |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 6388 MB |
