Firefield Barrage FF13061 handleiding
Handleiding
Je bekijkt pagina 9 van 20
REPLACING THE BATTERY
ILLUMINATED RETICLE
If the reticle appears dim or fails to illuminate, the battery needs to be replaced. Fireeld Barrage
Riescopes use a CR2032 to illuminate the reticle. 3 volt CR2032 batteries can be purchased at stores
where batteries are sold or online. In order to replace the battery:
1) Remove the battery cap located on the reticle illumination adjustment (7) with a at head screw
driver. Rotate the cap counterclockwise until it is removed. It may be necessary to hold the illumination
adjustment in place to prevent it from rotating.
2) Remove the old battery and insert a new battery, positive (+) side up.
4) Replace the battery cap. Use a at head screw driver, rotate the cap clockwise until it is attached. It
might be necessary to hold the illumination adjustment in place to prevent it from rotating.
5) Check that the reticle illumination is now functioning properly.
7
3. Tighten the screws to between 45 - 65 inch pounds of torque.
4. Check alignment and position, then boresight the riescope.
Bekijk gratis de handleiding van Firefield Barrage FF13061, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Firefield |
| Model | Barrage FF13061 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 1907 MB |
