Fieldmann FZD 5012-E handleiding
Handleiding
Je bekijkt pagina 8 van 17
EN 8
FZD 5012-E
FOR YOUR SAFETY
If foreign objects enter the cutting mechanism or the machine makes unusual noises or vibrates unusually,
immediately stop the motor and allow the machine to come to a complete stop.
Never use the machine without the inserting funnel.
If the shredder becomes clogged, first turn the machine off and pull the plug out of the socket and wait for the
machine to come to a complete stop before removing the clogged material. Keep the On/Off switch clean and
free of foreign objects.
Never attempt to hold or remove shredded material while the cutting roller is in motion.
Remove clogged shredded material only when the machine is turned off.
Prevent direct contact with the rotating cutting roller. Keep hands and feet away from the openings when the
machine is running.
Do not insert your hands or other body parts or clothing into the filling chamber, ejection chute or in the
vicinity of other moving parts.
Always remove shredded material from the ejection zone before it accumulates. This will prevent the shredder
from clogging and prevent the shredded material from entering the filling funnel by recoil and causing injuries.
No other persons or animals may stand within the radius of 3 m around the work area as they could be
injured by deflected objects.
Do not use the machine on a tiled or concrete floor. The shredded material could deflect and cause injury.
The symbols found on your machine must not be removed or covered over. Notifications on the machine that
are no longer legible must be replaced with new ones without delay.
Bekijk gratis de handleiding van Fieldmann FZD 5012-E, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Fieldmann |
| Model | FZD 5012-E |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 1744 MB |
