Fieldmann FZD 5012-E handleiding
Handleiding
Je bekijkt pagina 13 van 17
EN
GARDEN SHREDDER USER’S MANUAL
13
SETTING UP AND WORKING WITH THE SHREDDER
8. SETTING UP AND WORKING WITH THE
SHREDDER
SETTING THE COUNTER-BLADE DISTANCE
For efficient operation it is necessary to set the
distance between the counter-blade (Fig. 7, point
2) and the cutting roller (Fig. 7, point 3). The gap
between the cutting roller and the counter-blade
should be as small as possible.
A correct setting will enable the effective shredding
of all branch diameters.
Distance setting:
Turn on the machine.
To pull the counter-blade towards the cutting
roller, slowly turn the setting screw clockwise
(Fig. 7, point 1). Keep turning the screw until fine
aluminium fillings start falling out of the ejection
chute.
Fig. 7
Note: Soft material or wet branches may be torn instead of being cut. This problem may also be caused by
the counter-blade, which wears out after frequent use.
BEFORE TURNING ON
Make sure that:
Power cords are not damaged. If there are slits or cracks on a power cord, stop work and replace it immediately.
The machine is not damaged and all the screws are pulled tight.
The machine is completely and correctly assembled.
Check the power supply:
Make sure that the supply voltage corresponds to the rated voltage on the rating label and that the machine is
properly grounded.
Only use extension cords that have wires with a sufficient cross-section.
MATERIAL THAT THE SHREDDER CAN PROCESS
The shredder can process the following types of materials:
All types of branches up to the maximum diameter specified in the technical specifications.
Garden waste such as wilted plants or wet grass (shred alternatively with branches).
The shredder MUST NOT process the following types of materials:
Glass, metals, plastics, rocks, ceramics, branches thicker than specified in the technical specifications, hard
wood, thick wooden boards, fabrics, plastic bags, roots with soil.
Wastes that are almost in liquid form, e.g. kitchen scraps.
Bekijk gratis de handleiding van Fieldmann FZD 5012-E, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Fieldmann |
| Model | FZD 5012-E |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 1744 MB |
