Handleiding
Je bekijkt pagina 38 van 40
www.fhiaba.com · sales@fhiaba.com · Info Line +39 0434 420160 www.fhiaba.com · sales@fhiaba.com · Info Line +39 0434 420160
76
X-PRO SERIES:
Ventilation is insured by a forced air system
through a grille located in the upper part of the
appliance. This grille should never be covered by
panels or any other devices that could reduce its
efficiency. Please refer to page 5-6 to ensure cor-
rect air circulation.
6.4 Post installation control
Check that the front levelling feet have been pro-
perly installed.
Check that the connection to the water system
does not have any leaks and that the closing tap is
easily accessible.
Check that the electrical connection is correctly
installed and that the multipole switch and socket
are easily accessible.
Check the perfect alignment of the appliance
with adjacent structures.
Check that all adhesive tape and external or in-
ternal temporary protective devices have been re-
moved.
Check the perfect closing of the doors and the
smooth sliding of the drawers and shelves.
6.5 Start up
> To start the appliance, connect the plug to the
electrical mains: at this point, when opening the
door, the control panel will usually visualize the
message “Stand by”, and all the panel keys be off
>To turn on all the appliance compartments,
press the Unit
button for three seconds. The
display will show the message “Initial test” for
approx. 2 minutes. After this phase the compres-
sors will start up and remain on until the default
temperature set up in the factory is reached. Do
bear in mind that this condition could last seve-
ral hours. If the appliance is provided with an Ice
Maker, prior to switching it on make sure that
the water filter cartridge is installed, then fill the
water system. To this purpose switch off the Ice
Makerand performe a manual clean procedure.
At the end switch the Ice Maker on again by tou-
ching the
button.
> For further information about the appliance
operation, refer to the User Manual.
If at the first start - up the message Stand
by does not appear, but other messages ap-
pear, such as Fridge too warm, Fresco too
warm, Freezer too warm, or sound signals
are activated, it means that the appliance
has already started the cooling process.
If this is the case, deactivate any possible
acoustic signals by pressing the Alarm but-
ton, close the door and wait until the set
temperature is reached.
It is necessary to let the unit reach the correct
temperature before foods are stored inside.
6. COMPLETING THE INSTALLATION
Serigraa B02919202 VETRO USER 599 TFT - FHIABA
Limite per graca parti retro-illuminate - la parte bianca è trasparente
Testo e graca
00
°C+
Impostazioni
Funzioni
00
°C+
00
°C-
Colore SMEG
colore C71
cambiamento dimensioni foro
56x43mm 29-05-2019
lati obliqui 30-03-2020
icone ridotte 29-05-2019
BISELLATURA SUI 4 LATI
BISELLATURA SUI 4 LATI
Bekijk gratis de handleiding van Fhiaba KS4490FZ6IASS, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Fhiaba |
| Model | KS4490FZ6IASS |
| Categorie | Vriezer |
| Taal | Nederlands |
| Grootte | 6973 MB |
