Festool UG-CSC-SYS handleiding

Handleiding

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960/ 60

Afdrukken

Je bekijkt pagina 11 van 60

under

frame

UG-CSC-SYS

Bench

height

- High

working

position

680 mm (26-25/32")

- Low

working

position

240 mm (9-15/32")

Weight 18.2 kg (40 lb)

Can be

loaded as a

work bench

up to

100 kg (220.5 lb)

Can be

loaded as a

hand cart

up to

80 kg (176.4 lb)

5 Parts of the device /

Functional description

[1-1]

Feet locking lever

[1-2]

Additional feet

[1-3]

Handle

[1-4]

Shovel locking lever

[1-5]

Shovel

[1-6]

Shovel protective feet

[1-7]

Eyes for belt fastening

[1-8]

plate

[1-9]

Foot height adjustment

The specified illustrations appear at the begin

ning of the Operating Instructions.

6 Assembly

6.1 Fitting a handle

[2]

Fit the handle before using for the first time

(see figure [2]

).

7 Set-up/start-up

Keep the floor around the work bench level, in

good condition and free of loose objects (e.g.

chips and offcuts).

For the machine to stand securely on the plate,

always keep the plate free and clean.

7.1 Setting up in high working position [3]

► Offset slight unevenness in the stand area

with height adjustment [3-1].

The additional feet [3-2] serve to increase

stability with large or heavy workpieces.

7.2 Setting up in low working position [4]

See figure [4].

7.3 Setting up in hand cart position [5]

► Set up the protective feet to protect the

shovel's surface.

► Secure the load to be transported with the

belt, which is one of the items included. To

do so, guide the belt through the eyes [5-1]

provided.

7.4 Positioning the

CSC SYS 50 EBI [6]

The plate of the underframe UG-CSC-SYS

is

specially designed for the tool reception of

the CSC SYS 50 EBI. In each case,

the CSC SYS 50 EBI can be rotated by 30° until

the next secure tool reception.

7.5 Shovel as workpiece support

[8]

The height of the work surface provided by

a

CSC SYS 50 EBI placed on the underframe

matches that of a fully erected shovel. Longer

workpieces can be supported on the erected

shovel.

7.6 Putting down half-stationary

machines

[7]

Other half-stationary machines must be put

down on the perforated top inside the marked

area [7-1]

.

8 Service and maintenance

Customer service and repairs

must

only be carried out by the manufac

turer or service workshops. Find the

nearest address at:

www.festool.co.uk/service

Always use original Festool spare

parts. Order no. at:

www.festool.co.uk/service

EKAT

1

2

3

5

4

9 Environment

Do not dispose of the device in the

household waste! Recycle devices,

accessories and packaging. Observe

applicable national regulations.

Information on REACH: www.festool.co.uk/

reach

English

11

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960/ 60

Bekijk gratis de handleiding van Festool UG-CSC-SYS, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.

Productinformatie

Caratteristiche Prodotto

Andere merken in Niet gecategoriseerd