Festo PDAD-73-G1/2 handleiding
Handleiding
Je bekijkt pagina 7 van 42
Festo — PDAD — 2022-02i
Additional information
7
Provide complete pressure reduction.
–
For protection of the drying agent cartridges ensure that compressed air is not fed to the dryer if the
power feed is interrupted.
–
Protect the device and the mounting components from mechanical vibrations.
–
Visually inspect the device regularly for damage. Replace damaged device.
2.2 Intended use
The cold-regenerating adsorption dryer is intended exclusively for drying compressed air under the
specified operating conditions, e.g.:
– Install indoors, protected from the weather.
– Maximum relative humidity 80% at temperatures up to 31 °C, linear rise to 50% at 40 °C.
–
Do not use at altitudes above 2000 m.
–
Install vertically or horizontally
è
Tab. 10 Permitted mounting positions.
– The condensate input and the condensate output must be connected
è
5.2.2 Condensate input and
condensate output.
2.3
Training of qualified personnel
Installation, commissioning, maintenance and disassembly only by qualified personnel.
The qualified personnel must be familiar with the installation of electrical and pneumatic control
systems.
3 Additional information
– Contact the regional Festo contact if you have technical problems.
è
www.festo.com.
–
Accessories and spare parts
è
www.festo.com/catalogue.
Bekijk gratis de handleiding van Festo PDAD-73-G1/2, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Festo |
| Model | PDAD-73-G1/2 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 4080 MB |
