Festo EPCS-BS-60-350-5P-A-ST-M-H1-PLK-AA handleiding

Niet gecategoriseerd

Festo

28 pagina's

PDF beschikbaar

Handleiding

Festo — EPCS-BS — 2023-11e

Safety

1 Applicable documents

All available documents for the product

www.festo.com/sp.

Document Product

Operating instruction Integrated drive EMCS-ST

Operating instruction Electric cylinder with spindle drive EPCC-BS

Assembly instructions Guide unit EAGF-P2-KF, for EPCC-BS only

Assembly instructions Axial kit EAMM-A

Assembly instructions Parallel kit EAMM-U

Assembly instructions Adapter NEFC-M12G8-0.3-M12G5-LK

Tab. 1: Applicable documents for the product

2 Product version

This documentation refers to the following datasets:

–

Hardware version of the integrated drive up to "Rev02" or "RevB"

– Firmware version of the integrated drive from "v19.0.4.107_release"

– IO-Link device description file (IODD) from V1.2.6

–

Adapter NEFC from production date 01/2022

When using a different firmware version, check whether a corresponding version of the documentation

is available

www.festo.com/sp.

Safety

3.1 Safety instructions

– Observe the identifications on the product.

– Before working on the product, switch off the power supply and secure it against being switched on

again.

–

Store the product in a cool, dry environment protected from UV and corrosion. Keep storage times

short.

– Observe the tightening torques. Unless otherwise specified, the tolerance is ±20%.

3.2 Intended use

The electric cylinder unit EPCS-BS positions payloads between two end positions or drives external

guides.

3.3 Training of qualified personnel

Work on the product may only be carried out by qualified personnel who can evaluate the work and

detect dangers. The qualified personnel have knowledge and experience in dealing with electric drive

systems.

Bekijk gratis de handleiding van Festo EPCS-BS-60-350-5P-A-ST-M-H1-PLK-AA, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.