Festo EPCS-BS-60-350-5P-A-ST-M-H1-PLK-AA handleiding

Niet gecategoriseerd

Festo

28 pagina's

PDF beschikbaar

Handleiding

Festo — EPCS-BS — 2023-11e

Technical data

EPCS-BS -32 -45 -60

IO-Link port class A

IO-Link protocol version Device V 1.1

1) Maximum value for Speed In/Speed Out at level10

2) Parameter that cannot be changed.

3) Maximum value for Force at level10

4) Force is controlled and evaluated by closed-loop control of the motor current. Depending on the mechanism of the drive, a linear force

can be calculated from the measured level of current. The target is set as a percentage of the rated motor current and may differ from

the actual force at the electric cylinder. At the lower force levels the frictional force of the drive system may be greater than the set

feed force and may result in the drive system coming to a standstill.

5) The force acts on the stop for £ 100 ms

6) Distance (MechIn – LimIn or MechOut – LimOut)

Tab. 8: Technical data EPCS-BS

Bekijk gratis de handleiding van Festo EPCS-BS-60-350-5P-A-ST-M-H1-PLK-AA, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.