Festo EPCS-BS-60-350-5P-A-ST-M-H1-PLK-AA handleiding

Niet gecategoriseerd

Festo

28 pagina's

PDF beschikbaar

Handleiding

Festo — EPCS-BS — 2023-11e

Operation

10.4 HMI display and control elements

The HMI display and control elements can be used to perform the following functions in the HMI

menu:

–

Unlock pushbutton actuators (Unlock HMI), press and hold for 3s  — an active positioning task

in DIO or IO-Link mode is stopped

(Condition for IO-Link operation: IO-Link parameter 0x000C.4 = false)

–

Select menu function with pushbutton actuators (selecting menu), press

–

Parameterise Speed Out, Speed In and Force setpoint values

(Set value: 10, 20, ..., 100%of the maximum value

14 Technical data) and save (Save), press

– Parameterise the position of the reference end position "Ref" (Set Ref) and run the referencing

movement Mov

Ref

(Start

Ref

: Pos

Act

èLim

Out

), press

– Run Start Press movement (Start/Stop) and save Start Press Position Pos

Start Press

(Save), press

–

Execute demo run (Start/Stop)

–

Lock pushbutton actuators (Lock HMI), press and hold for 3s or no pushbutton actuator input

for 15s

– To acknowledge an error, press and hold for 3s

–

Reset to factory settings, press , and simultaneously for 10s and then carry out a

Power OFF/ON on the logic power supply 24 V DC [pin 1].

Bekijk gratis de handleiding van Festo EPCS-BS-60-350-5P-A-ST-M-H1-PLK-AA, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.