Festo EPCE-TB-45-50-FL-MF-ST-M-H1-PLK-AA handleiding

Niet gecategoriseerd

Festo

36 pagina's

PDF beschikbaar

Handleiding

Festo — EPCE-TB — 2023-11d

Malfunctions

11 Maintenance

11.1

Cleaning

–

If the piston rod is dirty, clean it with a clean, soft and lint-free cloth without cleaning agents and

then apply the lubricant thinly to the piston rod.

–

Clean the other product components with a clean, soft cloth and non-abrasive cleaning agents.

11.2 Lubrication

Lubrication interval and accessories

Lubrication Piston rod

Lubrication interval If required, e.g.if the grease layer is insufficient.

Accessories

Lubrication point Surface

Lubricant ELKALUB VP 922, ChemieTechnik, Vöhringen

Tab. 13: Overview of lubrication intervals and accessories

12 Malfunctions

Acknowledge error

With error acknowledgment, active error messages are deleted from the diagnostic memory if the

cause of the error was remedied before acknowledgment.

Errors can be acknowledged via the following interfaces:

–

Restart:

– Logic voltage L

, Power OFF/ON [Logic, Pin 1]

– HMI:

– Press and hold for3s

–

DIO, digital inputs:

–

DI1 "Mov

" and DI2 "Mov

Out

" =1 [Logic, Pin 5/6]

– IO-Link, device data:

– 0x0107.0 Quit Error =true

–

IO-Link, process data:

–

0x0029.3 Quit Error =true

– 0x0029.1 and 0x0029.2 =true, 0x0029.5 =any

Diagnostic messages and fault clearance

"Information, Warnings and Errors" diagnostic messages are displayed by the C/Q LED and menu and

parameters LED displays.

Errors are reported to the controller as follows:

– DIO operation: output signals DO1 and DO2 = 1 [Logic, Pin 2/3]

– IO-Link operation: ProcessDataInput state "In" (0x0028.1) and state "Out" (0x0028.2) = true

Bekijk gratis de handleiding van Festo EPCE-TB-45-50-FL-MF-ST-M-H1-PLK-AA, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.