Festo ELGS-BS-KF-32-500-8P-ST-M-H1-PLK-AA handleiding
Handleiding
Je bekijkt pagina 4 van 28
4
Festo — ELGS-BS — 2023-11e
Safety
1 Applicable documents
All available documents for the product
è
www.festo.com/sp.
Document Product
Operating instruction Integrated drive EMCS-ST
Operating instruction Spindle axis ELGC-BS
Assembly instructions Axial kit EAMM-A
Assembly instructions Parallel kit EAMM-U
Assembly instructions Adapter NEFC-M12G8-0.3-M12G5-LK
Tab. 1: Applicable documents for the product
2
Product version
This documentation refers to the following datasets:
–
Hardware version of the integrated drive up to "Rev02" or "RevB"
–
Firmware version of the integrated drive from "v19.0.4.107_release"
– IO-Link device description file (IODD) from V1.2.6
– Adapter NEFC from production date 01/2022
When using a different firmware version, check whether a corresponding version of the documentation
is available
è
www.festo.com/sp.
3
Safety
3.1 Safety instructions
–
Observe the identifications on the product.
– Before working on the product, switch off the power supply and secure it against being switched on
again.
–
Store the product in a cool, dry environment protected from UV and corrosion. Keep storage times
short.
– Observe the tightening torques. Unless otherwise specified, the tolerance is ±20%.
3.2 Intended use
The spindle axis unit ELGS-BS positions payloads between two end positions or drives external
guides.
The spindle axis unit ELGS-BS is approved for slide operation.
Bekijk gratis de handleiding van Festo ELGS-BS-KF-32-500-8P-ST-M-H1-PLK-AA, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Festo |
| Model | ELGS-BS-KF-32-500-8P-ST-M-H1-PLK-AA |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 2549 MB |
