Ferrofish Pulse 8 AE handleiding
Handleiding
Je bekijkt pagina 15 van 28
14
GAINS
GAINS
The GAINS display is used to adjust
the sensitivity of the analog inputs.
These are individually adjustable in
1dB steps from +20dBu to -8dBu.
The number given below the fader
indicates the maximum level that
the converter accepts. If, for
example, a fader is set to a value of
19, the input can process a level of
19 dBu maximum and in this case
would output 0 dBFS on the digital
side. Higher values would lead to
digital clipping, which you should avoid. In addition, you can see the level indicators of
the analog inputs, so that you can adjust the level correctly. The dB scale of the display
can be found on the right side of the view. The value of -8dBu corresponds approxi-
mately to the level of -10dBV used for consumer devices.
To make a setting, select the channel you want to adjust with the knob, and then press
the MENU button. Then you can adjust the level using the knob.
Pressing the MENU button again will move the selection to the next channel, which you
can then set. When you are done with the settings, press the ESC button to return to the
channel selection.
If you want to set multiple channels
at the same time, press and hold the
MENU button longer. In the menu
you can select 1, 2, 4, or all 8
channels.
If multiple channels are selected,
you can set them to the same level
by short pressing the POWER
button.
Bekijk gratis de handleiding van Ferrofish Pulse 8 AE, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Ferrofish |
| Model | Pulse 8 AE |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 2682 MB |
