Ferrofish Pulse 16 MX handleiding
Handleiding
Je bekijkt pagina 10 van 28
10
Main Menu – LEVELS
The LEVELS screen is similar to the GAINS screen described before. Same
as with the inputs also the outputs can be adjusted in 1dB steps between -
8dBu to +20dBu.
.
The dB scale on the right side shows the resolution of the metering levels.
This scale does not show the level value of the fader!
The number above the fader shows the maximum level in dBu, which the
output is able to give out. When the fader is set to 20 like shown in the
picture above, the output of a digital signal with 0dBFS will be +20dBu on
the analog output.
The value of -8dBu is chosen on purpose, because it’s
close to the level of analog consumer gear (-10dBV =
-7.78dBu)
Bekijk gratis de handleiding van Ferrofish Pulse 16 MX, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Ferrofish |
| Model | Pulse 16 MX |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 4365 MB |
