Handleiding
Je bekijkt pagina 17 van 37
- 17 -
USING THE ELECTRONIC CONTROL
POWER TOGGLE & SET POINT UP ADJUST
MANUAL DEFROST AND SET POINT DOWN ADJUST
SET POINT ADJUST MODE
DIGITAL DISPLAY
Button and Display Overview
Press and hold this button for 3s to turn system on (if off) or off (if on).
Also used to adjust set point when in set point adjust mode
Press to enter set point adjust mode, confirm set point changes, and mute alarms.
Press and hold this button for 3 seconds to initiate a manual defrost (and cancel defrost
if initiated), also adjusts set point down when in set point adjust mode
+
Press both buttons simultaneously to check air stream probe temperature. This is not
an indicator of product temperature.
Powering on control
To turn power on to the refrigeration system press and hold, for three seconds, the blue up arrow
on the control’s keypad. The keypad will read “On” while the button is depressed. When the
system powers on, the display will read the current set point (a number “1” through “9”). The
orange compressor run indicator will illuminate on the display.
Bekijk gratis de handleiding van Federal SSRC-2452, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Federal |
| Model | SSRC-2452 |
| Categorie | Koelkast |
| Taal | Nederlands |
| Grootte | 6182 MB |
