Handleiding
Je bekijkt pagina 60 van 78
5. Power level adjustment
Under the standby mode,press cooking zone select
button to choose the corresponding cooking zone,
corresponding cooking zone digital tube decimal point
" "and heating level will display.You can press the plus
" "and minus " " buttons to adjust suitable power
level.
By holding down " " " " buttons, buttons, the value
on the zone indicator will adjust up or down.Each
pressing " " button,power level will add one,until level
9, and displayed on its corresponding digital tube. Each
pressing " " button,power level will reduce one,until
level 0(Each pressing of " " or " " button, a short
audible signal will be heard).Keep pressing " " " "
buttons will make continuously increasing or decreasing
effect.
Upon completion of power level adjustment, the decimal
point " "of digital tube will stop flashing and disappear
and normally display the power level within 10 seconds
of no operation.
When switching any of the cooking zone power level to
0, it will stop the power output of that cooking zone.
If a cooking zone has been heated,power level of all the
cooking zone are “0”, the appliance will automatically
enter into shutdown status after 1 minute no operation.
1) Touch the cooking zone select button which need to
heat, corresponding hob top digital tube decimal point
" " will display.
2) Touch the cooking zone select button to close the outer
ring, the inner ring continues to work.
EN-19
Bekijk gratis de handleiding van FAR TVS 5200-B23, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | FAR |
| Model | TVS 5200-B23 |
| Categorie | Fornuis |
| Taal | Nederlands |
| Grootte | 5912 MB |
