Handleiding
Je bekijkt pagina 52 van 78
• The kitchen units that are in direct contact with the appliances
must be heat-proof(min. 95°).
• The appliance can be installed on a work surface with a
thickness of between 30 and 40 mm and near to walls which
are higher than the work surface,maintaining a minimum
distance of 100 mm.
• Carry out all cutting of the unit and work surface then
carefully remove shavings or sawdust before inserting the
appliances.
• To ensure a correct ventilation of the hob please comply with
the dimensions shows in figures .
• Always refer to the manufacturer for specific instructions,
• Make sure the surface is level and square and that no part
interferes with the space required for installation.
• Prepare the cut as indicated(see installation dimensions).
Preparing the unit for a built-in appliance
WARNING
back edge
of cutout
raar of cabinet or
rear wall under
countertop
A:40mm min
B:40mm max
EN-11
Bekijk gratis de handleiding van FAR TVS 5200-B23, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | FAR |
| Model | TVS 5200-B23 |
| Categorie | Fornuis |
| Taal | Nederlands |
| Grootte | 5912 MB |
