FAR MG 21912 handleiding

Handleiding

123456789101112131415161718192021/ 21

Afdrukken

Je bekijkt pagina 19 van 21

TROUBLESHOOTING

Please empty the water reservoir if the ice maker

is not used for a long me.

NOTE: Do not use organic solvent, boiled water,

detergent, strong acid and strong alkali etc. for

cleaning.

8. Please empty the water reservoir and dry it for

storage if the ice maker is not used for a long me.

Problem

Cause

Soluon

“ADD WATER”

indicator turns

on

1. Stop making ice, refill

water and then press

“ON/OFF” key to restart

ice-making cycle.

2. Do cleaning

3. Send it to the authorized

department for repair.

1. Low water level

or lack of water.

2. The water

screen at the

boom of water

reservoir is

blocked.3. Pump

malfuncon.

1. Remove the ice from ice

basket.

2a. Wipe up the foreign

objects on the infrared

light-eming diode &

light-receiving diode and

restart the ice maker.

2b. Call Customer Service if

the infrared light-eming

diode & light-receiving diode

sll can not work aer

wiping up the foreign

objects on them and restart-

ing the ice maker.

1. Ice basket is full

and the infrared

light is blocked by

the ice.

2. Infrared

light-eming diode

& light-receiving

diode do not work.

“ICE FULL”

indicator lights

up

EN-12 EN-13

ENGLISH

ENGLISH

“ADD WATER”

and “ICE FULL”

indicators turn

on simultane-

ously

1. The ice tray is not

in the right posion.

2. The “ICE FULL”

condion can not

be detected as the

infrared light

module is interfered

by the sunlight.

1. Unplug the appliance and

check if the ice tray is

blocked by something.

2. Unplug the appliance and

move it to a place which is

not exposed to the sunlight,

then plug the appliance and

acvate it again.

The ice collects

together.

Making ice takes

too much me.

Stop making ice and restart

the ice-making cycle aer

the ice melts.

The water in the

water reservoir is

of too low tem-

perature.

Fill the water reservoir with

water ranges between 8℃

and 25℃.

The ice-making

cycle seems

normal but no

The ambient

temperature or

water tempera-

ture is too high.

Start the ice-making cycle

at a environment with an

ambient temperature less

Fig.1

123456789101112131415161718192021/ 21

Bekijk gratis de handleiding van FAR MG 21912, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.

Productinformatie

Gerelateerde producten van FAR (Niet gecategoriseerd)

Handleiding bekijken

FAR SF23

Niet gecategoriseerd - handleiding

Andere merken in Niet gecategoriseerd