Handleiding
Je bekijkt pagina 51 van 79
Installation instructions
• Ventilation condition
The position you select for the refrigerator installation
should be well-ventilated and has less hot air. Do not
locate the refrigerator near a heat source such as
cooker, boiler, and avoid it from direct sunlight, thus
guaranteeing the refrigeration effect while saving
energy consumption. Do not locate the refrigerator in
the damp place, so as to prevent the refrigerator from
rusting and leaking electricity. The result of the
refrigerant charge amount of the refrigerator being
divided by the total space of the room in which the
refrigerator is installed shall be less than 8g / m³.
• Heat dissipation space
When working, the refrigerator gives off heat to
surroundings. Therefore, at least 30mm of free
space should be spared at the top side, more than
100mm on both sides, and above 50mm at the
back side of the refrigerator.
• Dimensions in mm
IMPORTANT/REMARK
The amount of refrigerant charged for the
refrigerator can be found on the
nameplate.
ENGLISH
GB-10
W D H A B C(°) E
540
550 1760
910
1055
130±5 50
FF
100100
Bekijk gratis de handleiding van FAR CBG2625DX, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | FAR |
| Model | CBG2625DX |
| Categorie | Koelkast |
| Taal | Nederlands |
| Grootte | 5510 MB |
