Handleiding
Je bekijkt pagina 66 van 76
FREEZER DEFROSTING
• Frost will accumulate inside the freezer depending
upon the length of time during which the door is left open
or the amount of moisture introduced.
• It is essential to ensure that no frost or ice is allowed to
form at places where it will affect the close fitting of the
door seal.
• This might allow air to penetrate the cabinet, thus
encouraging continuous running of the compressor.
• Thin frost formation is quite soft and can be removed
with a brush or plastic scraper. Do not use metal or sharp
scrapers, mechanical devices or other means to
accelerate the defrosting process. Remove all dislodged
frost from the cabinet floor.
• For the removal of thin frost it is not necessary to
switch
off he appliance.
MAINTENANCE
FRIDGE DEFROSTING
The fridge defrosting process is carried out
automatically
every time the compressor stops.
The defrost water is automatically routed
to the drain port and into a tray placed on
the top of the compressor to the rear of the
appliance from which it evaporates.
Make sure the drain port on the fridge at the
rear of the appliance is kept clear.
ENGLISH
GB-27
Bekijk gratis de handleiding van FAR CB2625, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | FAR |
| Model | CB2625 |
| Categorie | Koelkast |
| Taal | Nederlands |
| Grootte | 6829 MB |
