Fantini Cosmi EV200RL handleiding
Handleiding
Je bekijkt pagina 17 van 28
17
EV200RL
EC18RL: Radio outdoor temperature probe
This detects and transmits the external temperature to the EV200RL climate control unit.
EV200RL
EV200RL: Climatic module and radio multi-plant implementation
This controls (actuates) the electrothermal manifold heads and manages the mixing and
activation of the secondary circuit (hot/cold).
For more details, please refer to the installation manual of the single Fantini Cosmi device.
2.3 - ACCESSORIES
To regulate the supply temperature of the heating system, the EV200RL module requires connection to a flow
temperature sensor and an outdoor sensor:
EC17: Wired flow sensor, NTC 10 kΩ at 25°C (2 m cable)
EC16A: Wired flow sensor, NTC 10 kΩ at 25°C, with G1/2” immersion well
EC18RL: Wireless outdoor sensor, LoRa®
EC14: Wired outdoor sensor, NTC 1 kΩ at 25°C
3 - INSTALLATION
3.1 - FIXING
Installation and maintenance operations must be carried out with the system’s
electrical voltage switched off and by qualified personnel in compliance with the
regulations in force.
Open the device by releasing the two side latches to remove the upper unit containing the electronic section.
Warning: do not break the seal.
Bekijk gratis de handleiding van Fantini Cosmi EV200RL, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Fantini Cosmi |
| Model | EV200RL |
| Categorie | Thermostaat |
| Taal | Nederlands |
| Grootte | 2775 MB |
