Falmec Level One handleiding
Handleiding
Je bekijkt pagina 33 van 124
33
ENGLISH
A solution of water, preferably distilled, and white vinegar can be useful to re-
move limescale stains and soften encrustations before removing them with
the appropriate scraper.
Never use alcohol on the hob surface.
Do not use products containing:
- corrosive agents (soda, acids, ammoniac).
- abrasive agents (dusts or paste).
Do not use pointed or abrasive objects.
After cleaning, dry the appliance with a soft cloth.
Never drag the pans across the hob, but lift them, so as to avoid
scratches.
Do not wash the aps in a dishwasher.
USEFUL CARE TIPS
Clean your glassceramic cooktop regularly, preferably every time you use it.
Avoid using abrasive sponges or scouring agents.
Harsh chemical cleaners like oven sprays or stain removers are also unsuitable, as
are bathroom or household cleaners.
Accidents happen …
Do not allow the hot hob to come into contact with plastic, tin foil, sugar or
sugary food have fallen on the hot glass-ceramic cooktop. Please scrape it off
the hot surface as quickly as possible. If these substances melt, they can damage
the glass-ceramic cooktop.
Sparkling results in only three steps:
To thoroughly clean your glass-ceramic cooktop, first remove dirt and food with
a suitable metal scraper.
Once the glass-ceramic cooktop has cooled, put a few drops of a suitable clean-
er on it and rub it on with a paper towel or a clean cloth.
Then wipe the glass-ceramic cooktop with a damp cloth and dry it with a clean
cloth.
How do I identify a suitable glass-ceramic scraper?
• Scraper made of metal (won’t melt or catch fire)
• Scraper easy to lock / to unlock
• Blade is fixed precisely, it does not shift
• Blade is unbroken, clean and stainless
• Scraper certified by testing institute, if procurable (e.g. TÜV-GS seal)
• User manual and safety instructions available
CLEANING OF INTERNAL SURFACES
Do not clean electrical parts, or parts related to the motor inside
the hood, with liquids or solvents.
For the internal metal parts, see the previous paragraph.
METAL ANTI-GREASE FILTERS
It is advised to frequently wash the metal filters (F) (at least once a month)
leaving them to soak in boiling water and cleaning solution for 1 hour, taking
care not to bend them.
Do not use corrosive, acid or alkaline detergents.
Rinse them well and wait for them to be completely dry before reassembling
them.
Washing in a dishwasher is permitted, however, it may cause the filter material
to darken: to reduce this, use washes at low temperatures (60°C max.) without
detergent.
To extract and insert the metal anti-grease filters see the assembly instructions.
CARBON AND ZEOLITE FILTERS (OPTIONAL)
For the service life and regeneration of filters, refer to the specific instructions
supplied with their packaging.
Wait until the filter cools before reassembling it.
GREASE DRIP TRAY
It is advisable to clean the tray every 1 month.
Do not use corrosive, acid or alkaline detergents.
For more thorough cleaning, remove the oil collection tray (see figure) and wash
it with water and washing up liquid. Rinse it well and wait for it to be completely
dry before reassembling it.
Do not wash the grease drip tray in a dishwasher.
WHAT TO DO IN CASE OF COOKERS PROBLEMS
The cooker or cooking areas do not turn on:
• The cooker is not connected to the electric network.
• The protection fuse is released.
• Check if the block is not active.
• Keys are covered with water or grease.
• An object is placed on the keys.
The symbol is displayed
.
• There is no saucepan on the cooking area.
• The container used is not compatible with cooktops.
• The diameter of the saucepan bottom is too small compared to the
cooking area.
The symbol [E] is displayed:
• Disconnect and connect the cooker.
• Contact the after-sales centre.
One of the area or the entire cooker turns o:
• The safety overheating system is active;
• The cooker or one cooking area remains on for too long;
• one or more keys are covered;
• one of the saucepans is empty and the bottom overheated.
The fan keeps on working after the cooker shutdown:
• This is not a malfunction: the fan keeps on protecting the electronic
power unit of the device.
• The fan stops automatically.
COOKERS ERROR CODES
In case of error, the device displays error codes for support purposes.
The display of the cooking area shows the error code alternating 'E' with
other symbols and numbers.
Error
code
Description Possible
causes
Solution
+
+ 0 + 3
Continuous acti-
vation of a key
- Metal objects
above the
keyboard
- water over the
keyboard
- Move the metal
objects
- Dry the water
+
+ 2 + 1
Internal tempera-
ture above 85°C
- covered or
insucient ven-
tilation areas
- Allow internal heat
dissipation
+
+ 3 + 1
Incorrect congu-
ration
- conguration
error
- Contact Technical
Supportstenza
tecnica
+
+ 4 + 2
Internal supply
voltages too high
or low
Overcharging
due to atmo-
spheric dischar-
ge, electrical
system failure or
incorrect power
connection
- Contact Technical
Support
+
+ 4 + 7
No communi-
cation between
keyboard and
inductor modules
- Communi-
cation cable
damaged or
disconnected
- Damaged in-
ductor module
- Contact Technical
Support
+
+ 2 + 0
+
+ 2 + 2
+
+ 3 + 5
+
+ 3 + 6
Control keyboard
internal error
- Contact Technical
Support
Bekijk gratis de handleiding van Falmec Level One, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Falmec |
| Model | Level One |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 23177 MB |
