Falcon Nexus SE 110 Induction handleiding

Fornuis

Falcon

52 pagina's

PDF beschikbaar

Handleiding

Max: 1.85 kW

Boost: 2.5 kW

Max: 1.85 kW

Boost: 3.2 kW

Max: 1.85 kW

Boost: 2.5 kW

Max: 1.85 kW

Boost: 2.5 kW

Max: 1.15 kW

Boost: 2.0 kW

Zone 2

Zone 1

Zone 3

Zone 4

Zone 5

Table 2.1

Cooking Zone

Minimum Pan Diameter

(Pan Base) mm

Front left 180

Rear left 180

Centre 210

Rear right 180

Front right 140

The very best pans have bases that are very slightly curved

up when cold (Fig. 2.3). If you hold a ruler across the bottom

you will see a small gap in the middle. When they heat up the

metal expands and lies at on the cooking surface.

Make sure that the base of the pan is clean and dry to prevent

any residue burning onto the hob panel. This also helps

prevent scratches and deposits.

n

Take care when placing hot lids onto the hob

surface. Lids that have been covering boiling or

steaming foods can ‘stick’ to the ceramic glass.

Should this occur, DO NOT attempt to lift the lid

o the hotplate: this may damage the hob surface.

Instead, carefully slide the lid to the edge of the hob

surface and remove.

Always use pans that are the same size as (or slightly larger

than) the areas marked on the hob. Using a lid will help the

contents boil more quickly.

n

Always take care before touching the surface, even

when the hob is turned o. It may be hotter than you

think!

The induction hob comprises of ve cooking zones

containing induction elements with dierent ratings and

diameters (Fig. 2.4) each with a pan detector and residual

heat indicator, and a hob control display.

The hob control display (Fig. 2.5) informs you of the following

induction hob functions:

• Dualzone indicator

• H Residual heat indicator

• L1/L2/L3 Low temperature setting

• Child lock

• Pan detector

• P Power boost setting

Pan Detector,

IMPORTANT: After use, switch o the hob element by its

control and DO NOT RELY on the pan detector.

If a cooking area is switched on and there is no pan in place

or if the pan is too small for the cooking area, then no heat

will be generated. The symbol [ ] will appear on the hob

control display; this is the “pan-missing symbol”. Place a pan

of the correct size on the cooking area and the [ ] symbol

will disappear and cooking can begin. After 10 minutes

without detecting a pan the cooking zone will switch o

automatically.

Table 2.1 shows the minimum pan sizes recommended for

each cooking zone.

Note: Using pans with a base diameter smaller than those

recommended will result in a power reduction.

Fig. 2.3

Fig. 2.4

Fig. 2.5

Bekijk gratis de handleiding van Falcon Nexus SE 110 Induction, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.