Fakir Vigor Plus LR 600 handleiding
Handleiding
Je bekijkt pagina 26 van 52
When assembling
• Push the plasma collector towards the
bottom of the device.
• Insert into position A
3. Take down the HEPA filter
Do not reverse the front and back of
the filter
• Immerge your hand into position A
and pull out the filter.
• When replacing the filter, please install
the filter with the exact front-and-back
direction as indicated on the sides of
the filter. Do not reverse the front and
back of the filter.
5. Take down the front filter
• Hold position A and lift up the front
filter
When assembling
• Attach the filter to the connecting
locations on the side
• Fasten the filter on the connection
locations.
Cleaning and maintenance
1) Unit front cover
Can be cleaned with flowing water
Please use a soft cloth to clean and
avoid scraping off the paint on the
cover. Avoid cleaning with hot water
or rubbing with excess force.
Otherwise damage or deformation
could be resulted.
2) Front filter
Can be cleaned with flowing water.
Do not clean with hot water.
3) Dust sensor cover
Use wring dry cloth to rub off all dust
on the sensor cover.
Use a vacuum cleaner to eliminate the
dust on the filter.
Unit body
Take down UV lamp before cleaning.
Use wring dry cloth to rub and clean.
4. Removing the TiO
2
filter
• Hold the clips of both sides to pull out
the filter.
26
Bekijk gratis de handleiding van Fakir Vigor Plus LR 600, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Fakir |
| Model | Vigor Plus LR 600 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 8154 MB |
