Fakir RCT 109 Cyclonic handleiding
Handleiding
Je bekijkt pagina 14 van 16
• To connect the rotating turbo brush,
remove the cleaner from the wall
mounting charging base.
• Ensure that the cleaner is switched Off.
• Push the brush head firmly into the nozzle.
Ensure that the two pins on the turbo
brush head are correctly located in the
two sockets either side of the nozzle.
• To remove the brush head pull it firmly
out of the air intake. The rotating brush
head is designed for cleaning short pile
carpets and rugs. It should not be used
for cleaning long pile carpets.
NOTE:
Picking up cotton, hair and other
threads may clog the brush head by
twisting around the brush head
spindle. If this happens remove the
brush head from the cleaner and
remove the hair from the brush to
maintain pick-up performance.
Emptying the Dust Container
To empty and clean the unit, carry out
the following procedure.
1. Ensure the unit is switched off.
2. Press and hold the release button.
3. Remove the dust container by pressing
the release button and tilting the container
holder away from the motor housing.
4. Push the container out of the unit as
shown.
5. Pull out the filter from the unit and empty
the container into a rubbish bin.
6. Wash and dry the inside of the dust
container.
7. Take the filter apart by twisting the front
section slightly anticlockwise. Tap the
two halves gently to remove any dust
which has accumulated. If it is very dirty,
carefully brush the filters with a small
brush.
8. Replace the filters and refit the dust
container making sure it is the correct
way up and it 'clips' into position.
14
Release
button
Bekijk gratis de handleiding van Fakir RCT 109 Cyclonic, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Fakir |
| Model | RCT 109 Cyclonic |
| Categorie | Stofzuiger |
| Taal | Nederlands |
| Grootte | 2508 MB |
