Fakir RC1200 handleiding
Handleiding
Je bekijkt pagina 9 van 12
9
How To Recharge Your Vacuum
Cleaner
CAUTION: Re-charge your unit only
with provided charging adaptor
1. Hold bracket against wall to mark
location for screws. Make sure the
wall bracket is positioned vertically,
with the charg er socket at the top.
2. Use a 6 mm drill for drilling holes for
the plastic anchors.
3. Ins et t he a nchors a nd d r iv e t he
screws into both holes, leaving 6 mm
of each screw exposed.
4. Place the bracket over the screws
and slide the bracket downward to
allow the screws t
o move into the
slots.
5. Tighten th e sc rews t o s ecure the
bracket.
6. Plu g the charg er into an elec trical
outlet.
7. Re st th e cleane r on the doc kin g
ledge, with the nozzle pointed down,
and push in on the top of the handle
until you hear ch arger socke t click
into place. The charging in dicator
light on the vacuum will illuminate to
indicate that the vacuum cleaner is
properly charging.
NOTE: CHARGE THE CLEANER FOR
10-12 HOURS BEFORE INITIAL USE.
TH
E BATTERIES OF A NEW CLEANER
ARE ON A LOW CHARGE.
Keeping Your Vacuum Cleaner Ready
For Use
Return your vacuum cleaner to the
recharging stand after every use. Firmly
position into the recharging stand ensuring
that the vacuum cleaner fits correctly onto
the contacts.
It will then be recharged and ready for
operation at all times.
The plug charger can be left in the electrical
outlet at all times. It is impossible to
overcharge the batteries. The plug charger
will become warm, however, this is not a
cause for concern.
Bekijk gratis de handleiding van Fakir RC1200, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Fakir |
| Model | RC1200 |
| Categorie | Stofzuiger |
| Taal | Nederlands |
| Grootte | 1435 MB |
