Fakir Prestige VL 45 GF handleiding
Handleiding
Je bekijkt pagina 29 van 40
9
• Place the nozzle plate (base foot) [2]
with pre-installed weight disc onto the
pedestal / telescopic tube [3] precisely
(the bars on the base foot have to
engage with the corresponding reces-
ses on the pedestal tube) and fix with
the included cap nut [1] and secure.
• Place the back protective grid [5]
exactly onto the motor head [4] (insert
the three pins on the motor head into
the three holes in the protective grid)
and screw tightly using the included
cap nuts [6].
• Screw out small M3 screw from outer
ring of the rear protective grid.
• If required, pull off the protective hose
from the motor axle.
• Place the fan blades [7] all the way
onto the motor axle and secure with
the included cap nut [8].
• Attention: left-handed thread.
• Place the front protective grid [9] exactly into the upper bracket on the rear protective
grid [5], push on and fix with the four swivel brackets (left and right). Fix both protective
grids at the bottom with the included M3 screw.
• Place the cooling fan with the control panel (motor head) onto the telescopic tube [3]
and secure with the knurled screw [10].
WARNING!
Never use a defective appliance.
WARNING!
Prior to assembly, make sure that the mains
plug is unplugged. If the mains plug is plug-
ged in, the appliance could accidentally be
switched on, resulting in injuries.
Assembly
Assembly
en
Bekijk gratis de handleiding van Fakir Prestige VL 45 GF, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Fakir |
| Model | Prestige VL 45 GF |
| Categorie | Ventilator |
| Taal | Nederlands |
| Grootte | 4174 MB |
