Fakir Prestige VC 20 S handleiding
Handleiding
Je bekijkt pagina 30 van 40
10
Assembly
en
Assemble in the following order:
If not already pre-mounted, remove the cap nut [15] from the tube [16] and push the
cover [17] over the telescopic tube. Pull out the telescopic tube [14] and then put on
the cap nut [15] again. Insert the 4 base feet [18] through the 4 holes in the cover [17]
onto the foot connector [19] and secure with the enclosed screws.
Place the back protective grille [7] exactly onto the motor head [10] (insert the two pins
on the motor head into the two holes in the protective grille) and screw tight using the
included cap nuts [6].
Place the fan blades [5] all the way onto the motor axle and secure with the included
cap nut [4] (left-handed thread
!
). If necessary remove the protective tube.
NOTICE!
Left-handed thread! Screw on the nut counter-clock -
wise. Note the flat surface on the motor axle
WARNING!
Prior to assembly, make sure that the mains
plug is unplugged. If the mains plug is plug-
ged in, the appliance could accidentally be
switched on, resulting in injuries.
ATTENTION!
Never twist the motor head by force.
Never push on the protective grid.
WARNING!
Never use a defective appliance.
Bekijk gratis de handleiding van Fakir Prestige VC 20 S, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Fakir |
| Model | Prestige VC 20 S |
| Categorie | Ventilator |
| Taal | Nederlands |
| Grootte | 3838 MB |
Caratteristiche Prodotto
| Kleur van het product | Black, White |
| Diepte | 500 mm |
| Hoogte | 1350 mm |
| Soort | Huishoudelijke ventilator met bladen |
| Aantal snelheden | 3 |
