Handleiding
Je bekijkt pagina 14 van 28
Wall mounting
The removable base [D] is used as the wall holder if the fan heater is to be wall-moun-
ted (for example in the bathroom). The fan heater engages securely in this holder. Simply
pushing the release button permits removal of the fan heater for attachment elsewhere
whenever, problem-free and without the base.
If you want to mount the fan heater on the wall:
• Select a spot near a socket, but not directly underneath it, and ensure the minimum
distances from the wall and from the ceiling and/or floor.
• To fit the wall holder, hold it against the wall at the intended spot with the release but-
ton upwards, and mark the positions of the fastening holes with a sharp pencil.
• Ensure that the holder is horizontal and that the holes are clear of electric cables and
pipes.
• Drill the holes at the marked points and insert plastic pougs. Then screw the wall hol-
der in tight (release button upwards).
• Slide the fan heater (while holding it vertical) into the wall holder by its rear face until
it can be heard to engage. To remove the fan heater, press the release button while
pulling the heater forwards.
Caution: When fitting the base as the wall holder, ensure that no curtains, towels or
other inflammable objects can be hung in front of the fan heater later on. This
could cause overheating.
Standard equipment
A
B
C
D
Operation
14
Bekijk gratis de handleiding van Fakir Hobby, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Fakir |
| Model | Hobby |
| Categorie | Heater |
| Taal | Nederlands |
| Grootte | 3516 MB |
Caratteristiche Prodotto
| Soort bediening | Draaiknop |
| Breedte | 240 mm |
| Diepte | 150 mm |
| Hoogte | 360 mm |
| Soort | Ventilator elektrisch verwarmingstoestel |
