Fakir ELEPHANT handleiding
Handleiding
Je bekijkt pagina 20 van 24
20
USAGE
GB
• Fill 800 cc (0,8 lt) liters of water into the container. The
water level should not exceed the “MAX” level indicated on
the container.
• Place the water container onto main body. Close the lid
properly.
• Connect the hose to the inlet socket located on the body.
Attached the extension tube to the hose handle. Attached
the floor brush to other side of the extension tube. your
device is ready to be used.
• You can attach the other accessories to telescopic tube.
CAUTION!
1.Your device is NOT wet/dry vacuum cleaner but
water filtered only. You do not vacuum any kind of
liquid.
2.You never use the vacuum cleaner without water in
container.
3. This device is only dust and dirt sucking. if the water
is dirty pls follow the maintenance and cleaning
instructions. If the water level higher than max. sign,
water gauge automaticly will be closed and vacuum will
be stopped. To start for cleaning, reduce the water on
the tank and wait for 15sec before turning it on again.
Preparation for Use
• After checking if the voltage meets the rated voltage, plug
in the appliance.
• Press on/off switch located on the top of the appliance.
• If the water becomes very dirty during cleaning, replace it
as described in the “Maintenance and Cleaning the
Appliance” section.
Operating the appliance
Bekijk gratis de handleiding van Fakir ELEPHANT, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Fakir |
| Model | ELEPHANT |
| Categorie | Stofzuiger |
| Taal | Nederlands |
| Grootte | 2691 MB |
