Handleiding
Je bekijkt pagina 63 van 80
OPERATION
Oven door is tted with the condensate
channel
The condensate channel is factory tted to
the bottom of the oven door.
Remove any water that collects in the
condensate channel after each steam pro-
gramme. Soak up the water with a cloth or
remove the condensate channel from the
door and dry it. (wait until the oven has cooled
down and remove and clean the condensate
channel according to the instructions in the
Cleaning and care section)
Note. If you use a conventional baking pro-
gramme at temperature exceeding 250°C
it is best to remove the condensate chan-
nel otherwise it may get deformed. When
cooled down, the condensate channel will
return to its original shape. Some deforma-
tion may occur when the oven is left closed
for a long time, however, the condensate
channel will return to its original shape.
Descale the steam system
When you have run several steam pro-
grammes, a ashing P10S message will be
shown on the display. This message prompts
you to descale the system. Select P10S from
the list of pre-set programmes to descale the
appliance. You can skip descaling twice, by
touching the
sensor. However, eventu-
ally the appliance will not allow you to run a
steam programmes again until you descale
the appliance.
Descale the appliance.
• Prepare the solution of 450 ml of water
and 50 ml of liquid descaling agent.
• Pour the solution into the water con-
tainer drawer.
• Press OK to start the P10S programme.
NOTE: During the descaling programme,
you will need to drain water from the steam
system 3 times.
Drain the descaling solution from the system
when you hear a beep and steam indicator
is ashing.
• Open the oven door.
• Then place deep baking tray under the
water drain.
• Press OK to drain the remaining des-
caling solution from the steam system.
Pour the solution out of the baking tray
and rinse it with water.
To rinse the steam system, pour 0.5 l of clean
water into the water container drawer and
touch OK to continue the steam programme.
Drain the descaling solution from the system
when you hear a beep and steam indicator
is ashing.
• Open the oven door.
• Then place deep baking tray under the
water drain.
• Press OK to drain the remaining des-
caling solution from the steam system.
63
Bekijk gratis de handleiding van Fagor 8H-893 TEN, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Fagor |
| Model | 8H-893 TEN |
| Categorie | Oven |
| Taal | Nederlands |
| Grootte | 6919 MB |
