Handleiding
Je bekijkt pagina 43 van 60
43
Pan detector
Pan detector is installed in induction hobs. Pan detector starts heating automatically when a pan
is detected on a cooking zone and stops heating when it is removed. This helps save electricity.
● When an suitable pan is placed on a cooking zone, the display shows the heat setting.
● Induction requires the use of suitable cookware with ferromagnetic base.
Pandetectordoesnotoperateastheon/osensor.
When switching the appliance on or o or changing the heat setting, attention should be
paid that only one sensor eld at a time is touched. When two or more sensor elds are
touched at the same time (except timer and child lock), the appliance ignores the control
signals and may trigger a fault indication if sensor elds are touched for a long time.
When you nish cooking switch o the cooking zone using touch control sensor elds
and do not rely solely on the pan detector.
The induction hob is equipped with electronic touch control sensor elds, which are operated
by touching the marked area with a nger.
Each time a sensor eld is touched, an acoustic signal can be heard.
OPERATION
If a pan is not placed on a cooking zone or the pan is unsuitable, the symbol is
displayed. The cooking zone will not operate. If a pan is not detected within 10 minutes,
the cooking zone will be switched o.
Switch o the cooking zone using the touch control sensor eld rather than by removing
the pan.
The protective device:
If the hob has been installed correctly and is used properly, any protective devices are rarely
required.
Fan: protects and cools controls and power components. It can operate at two dierent speeds
and is activated automatically. Fan runs until the electronic system has suciently cooled down
regardless of the appliance or the cooking zones being turned on or o.
Temperature sensor: Temperature of electronic circuits is continuously monitored by a
temperature sensor. If temperature is raised beyond a safe level, this protection system will
reduce cooking zone heat setting or shut down the cooking zones adjacent to the overheated
electronic circuits.
Pan detection: allows the hob to detect pans placed on a cooking zone. Small objects placed
on the cooking zone (eg, spoon, knife, ring ...) will not be recognised as pans and the hob will
not operate.
Bekijk gratis de handleiding van Fagor 3IF-31AC, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Fagor |
| Model | 3IF-31AC |
| Categorie | Fornuis |
| Taal | Nederlands |
| Grootte | 4259 MB |
