Handleiding
Je bekijkt pagina 6 van 112
Key
Function LED
T1
Turns the motor on/off at the first speed. Fixed
Hood open:
By pressing and holding the key for about 3 seconds, the motor is switched off
and the hood upward movement is activated.
-
Hood closed:
When pressed once, the hood moves down; when pressed again, the hood
stops. This condition should be considered as hood open even if it is not com-
pletely open; all functions are enabled. When the movement has ended, the mo-
tor starts at speed 2.
-
K-Link uncoupling
Long press when all loads are off (Motor+Light):
starts the procedure for the cancellation of all compatible K-Link devices previ-
ously paired with the K-Link Coupling function.
Upon successful completion
of the procedure LEDs T1
and T2 flash 5 times.
T2
Turns the motor on at the second speed. Fixed
Long press:
Activates/Deactivates the Activated Carbon Filters alarm.
Note: perform the operation with the lights on only (motor off).
All LEDs flash twice:
alarm activated.
All LEDs flash once:
alarm deactivated.
T3
Turns the motor on at the third speed. Fixed
Long press:
turns the motor on at the Intensive speed.
This speed is timed for 6 minutes. At the end of this time, the system automatic-
ally returns to the previously selected speed. If activated with the motor off, once
the time has passed it switches to OFF mode.
Flashing
Long press when all loads are off (Motor+Light):
performs a saturated Filters alarm reset.
All LEDs flash 3 times.
Signals the saturated Metal Grease Filters alarm and the need to wash them.
The alarm is activated after 100 hours of effective hood operation.
LEDs T2 and T3 lit with the
hood off.
Signals the saturated Activated Carbon Odour Filter alarm. The alarm is activ-
ated after 200 hours of effective hood operation.
LEDs T2 and T3 flashing with
the hood off.
T4
AUTO Mode
Activates/Deactivates the Automatic operating mode.
AUTO mode is deactivated whenever any other keys are pressed.
AUTO mode is activated when the key is pressed or the Coupled Induction
Cooktop is turned on.
The hood speed is automatically set using the highest power level present on the
hob. When the Intensive speed is requested and the request lasts for more than
6 minutes, the hood returns to speed 3 for 30 seconds before restoring the In-
tensive speed.
When the induction cooktop is turned off the last activated speed is held for 5
seconds, then speed 1 for 15 minutes. Once the 15 minutes have passed the mo-
tor turns off. The light status does not change.
Fixed light:
AUTO mode activated.
Off:
AUTO mode temporarily de-
activated.
K-Link coupling
Before starting the procedure follow the specific instructions of the manuals of the
devices to be coupled.
Long press when all loads are off (Motor+Light):
starts the pairing procedure between the hood and compatible K-Link devices (in-
duction cooktop or remote control). Up to 3 induction cooktops can be paired and
only one remote control. See the manual of the devices for details of the opera-
tions that need to be performed on these.
The coupling procedure takes 2 minutes. If no devices are recognised within this
time check that you have previously activated the procedure for the devices to be
coupled. The maximum number of linkable devices may have been reached.
LEDs T1 and T2 flashing:
coupling in progress.
Upon successful completion
of the procedure LEDs T1
and T2 will light up for 2
seconds.
6
Bekijk gratis de handleiding van Faber The Belle Plus, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Faber |
| Model | The Belle Plus |
| Categorie | Afzuigkap |
| Taal | Nederlands |
| Grootte | 11893 MB |
