Handleiding
Je bekijkt pagina 15 van 196

ER21
Hob switches off. The internal temperature of elec-
tronic parts is too high.
Let the hob cool down.
Please check if the hob has suffi-
cient ventilation.
If the error persists, please contact
the After-Sales Service.
E2
Corresponding
cooking area
switches off.
Empty or unsuitable pan.
Pan or ceramic glass surface tem-
perature too high.
Electronic component temperature
too high.
Let the hob cool down.
Use a suitable pan.
Do not heat empty pans.
E3
Corresponding
cooking area
switches off.
Unsuitable pan.
The pan is losing its magnetic prop-
erties and may damage the induction
hob.
Use a suitable pan.
The error is automatically cancelled
after 8 seconds and the cooking
area can be used again.
If any other errors occur, the pan
must be changed.
If the error persists, please contact
the After-Sales Service.
E6
Hob does not switch
on.
Power supply voltage and/or fre-
quency is out of range.
Check mains voltage and/or fre-
quency.
If necessary, contact the After-Sales
Service.
E8
Cooking areas are
turned off.
Fan fault.
Fan blocked by dust or fibres.
Clean and remove foreign bodies
from the fan.
If the error persists, please contact
the After-Sales Service.
E4-E5-E7-E9-ER20-ER22-
ER31-ER36-ER42-ER47-
EA-EH
Disconnect the hob from the power supply.
Wait a few seconds, then reconnect the hob to the power supply.
If the problem persists, call the After Sales Service and specify the error code that appears on
the display.
16. MAINTENANCE -
REPAIR AND
CONFORMITY
• Make sure that maintenance on elec-
trical components is only carried out
by the manufacturer or by the service
technicians.
• Make sure that damaged cables are
only replaced by the manufacturer or
by the service technicians.
When contacting the service depart-
ment, please provide the following in-
formation:
• Type of fault
• Device model (Art./Cod.)
• Serial number (S.N.)
This information can be found on the
identification plate. The identification
plate is affixed to the bottom of the
device.
Information on the product pursuant
to EU regulation no. 66/2014
Reference standards:
EN/IEC 60350-2
EN/IEC 50564
This appliance has been designed,
manufactured and sold in compliance
with the EEC directives.
17. TECHNICAL DATA
Product identification
Type: 4300
Model: GALILEO SLIM F600
Please see the identification plate af-
fixed to the bottom of the product.
The manufacturer makes continual im-
provements to products. For this
reason, the text and illustrations in these
instructions for use may change without
warning.
Further information on the technical
data is available on the website:
www.faberspa.com
15
Bekijk gratis de handleiding van Faber Galileo Slim F600, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
Merk | Faber |
Model | Galileo Slim F600 |
Categorie | Fornuis |
Taal | Nederlands |
Grootte | 23177 MB |