Handleiding
Je bekijkt pagina 14 van 176
10. USER MENU CUSTOMISATION
Before carrying out the procedure, it is advisable to read the entire paragraph.
– Press
.
– Press and hold
again for 3 seconds.
– The
key starts flashing.
– Press and hold
: the digits in the cooking area indicate .
– Hold
and start pressing the digit of the cooking areas in clockwise order starting from the left front one.
4
3
1
2
The rear left digit alternately indicates and a number from 2 to 9 indicating the menu code.
The front left digit indicates a number which depends on the parameters indicated in the selection.
– Press the left rear digit.
– Select a number on the power bar to access the menu code.
– Press the left front digit.
– Select a number on the power bar to select a value.
– Once the correct value has been entered, confirm by touching and holding
for 2 seconds.
– To exit the menu without saving, press
.
If no operation is carried out the user menu will close after 1 minute.
See the following table for the specifications:
Menu code Description Value
U2 Key sound volume control menu. 0 - Sound disabled
1 - Min.
3 - Max.
U3 Countdown beeper volume control
menu.
0 - Sound disabled
1 - Min.
3 - Max.
U4 Display brightness level control
menu.
0 - Max.
9 - Min.
U5 Countdown display control menu. 0 - Countdown display disabled
1 - Countdown display enabled
U6 Pan detection menu. 0 - Enabled
1 - Disabled
U7 Countdown end management
menu.
0 - Continuous flashing and shut-down
1 - Ten flashes and shut-down
2 - One flash and shut-down
U9
Menu to activate Hob-Hood
Coupling.
0 - Hob-Hood Coupling disabled
1 - Activate Hob-Hood Coupling procedure. The display shows an anima-
tion.
WARNING: once the procedure has been activated, refer to the hood
manual and check that the K-Link Coupling procedure has been activated.
The coupling procedure takes 2 minutes.
14
Bekijk gratis de handleiding van Faber FCH 64 KL, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Faber |
| Model | FCH 64 KL |
| Categorie | Fornuis |
| Taal | Nederlands |
| Grootte | 19638 MB |
