Handleiding
Je bekijkt pagina 12 van 176
Timer (generic)
Timer with alarm for generic use.
To enable: switch on the hob making sure there are no pans or active cooking areas.
The 3 digits to control the timer show “- - -”.
Press the digit to access the timer menu and display “0 0 0”.
Press “+” or “-” to set the timer countdown.
Hours - Tenths - Minutes
To confirm the set time, do not touch anything for 10 seconds.
When the countdown has finished, the digits are reset and an audible signal is emitted. The func-
tion can be interrupted by pressing any key.
Repeat the steps described to change the countdown value.
To disable: switch on the hob making sure there are no pans or active cooking areas.
Press the digit to access the timer menu and use “+” and “-” to set the display to “0 0 0”.
Defrost function
To enable: select one of the 4 cooking areas and press .
The digit of the selected area shows
.
To disable: press or press .
Heating function
This function is used to heat a pan to the maximum power before continuing to cook at a selected
level. The time interval for which the cooking area is held at maximum power depends on the final
cooking level that has been set. See the table:
Power level Timer (seconds)
1 48
2 144
3 230
4 312
5 408
6 120
7 168
8 216
9 Not available
P Not available
To enable, with a pan on the bob and the cooking area selected, press and hold the selected value
(from 1 to 8) on the power bar for 3 seconds. The display of the corresponding cooking area indic-
ates “A”.
The cooking level can be increased, but the function is disabled if it is decreased.
It can also be disabled by touching and holding the cooking area in question for 3 seconds.
Pause function
This function allows you to pause/restart any active function on the hob, by reducing the power
available in the cooking area and resetting all the functions. If the Pause function is not disabled
with 10 minutes, the hob automatically switches off.
To enable: With a pan on the hob and the cooking area selected, press and hold the Pause func-
tion key for at least 1 second. All the displays show .
To disable: press and hold for 1 second until it starts flashing. Press any other key within 10
seconds. The function is disabled and the hob continues with the previous settings.
Recall function
This function is used to recall the function settings of the hob if it is switched off by mistake or the
electricity is unexpectedly cut off.
When the hob is switched off, if it is switched on again with 6 seconds by touching , the
key flashes for 6 seconds. Press the key to recall the functions set previously. A beep is emit-
ted to confirm the operation.
12
Bekijk gratis de handleiding van Faber FCH 64 KL, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Faber |
| Model | FCH 64 KL |
| Categorie | Fornuis |
| Taal | Nederlands |
| Grootte | 19638 MB |
