Extron WC Pro 150 OCS handleiding
Handleiding
Je bekijkt pagina 9 van 55
WC Pro 150 OCS • Introduction 1
Introduction
This section covers the following information you should know about this guide and the products before
installation:
• Before You Begin
• About the WC Pro 150 OCS
• Application Diagrams
• Pre-configured WC Pro 150 OCS
• Advanced Configuration of the WC Pro 150 OCS with GCP
• PC System Requirements
Before You Begin
What This Guide Covers
This user guide provides instructions for an experienced installer to install an Extron WC Pro 150 OCS Workspace
Controller. This guide includes detailed information and best practices recommendations about cabling the
controller, a brief overview of the configuration process, and reference information.
Configure the controller using Extron Global Configurator software running in Global Configurator Professional
(GC Professional) or Global Configurator Plus (GC Plus) mode. This guide does not contain instructions on
detailed software-related setup steps or details of configuration within the software (see the Global Configurator
Help File and help files for related programs). The software help files describe how to use each program to
download drivers, add AV devices to a configuration, and configure basic functions.
Conventions Used in This Guide
Throughout this guide the WC Pro 150 OCS is also referred to as the “WC”, “WC Pro”, “sensor”, or “controller”.
Global Configurator software is referred to as “GC,” which can be run in Global Configurator Professional mode
(“GC Professional”) or Global Configurator Plus mode (“GC Plus”).
About the WC Pro 150 OCS
The WC Pro 150 OCS Workspace Automation Controller is a small and medium space, PoE powered occupancy
control processor with an integrated occupancy sensor used to detect motion using Passive Infrared (PIR) and an
acoustic sensor, when people walk into a small to medium conference room. Unique status LED indicators for
each sensor are used for ease of installation as well as intuitive setup.
There are three ways the WC Pro 150 OCS can be configured. First, out of box the workspace controller is
preconfigured for CEC control of display (see the PDF of the CEC Compatibility Chart) with the digital output 2
following the occupancy state. Second, simple web configuration can be done via the internal web page for basic
power on and off automation of display and projector devices (see Internal Web Page Configuration on
page 23). Third, advanced configuration can be done using Global Configurator Professional (GC Professional) or
Global Configurator Plus (GC Plus). For configuration with Global Configurator Professional (GC Professional) or
Global Configurator Plus (GC Plus), the LinkLicense for WC Pro Control Processor is required. Global
Configurator and other useful software applications are available at www.extron.com.
Once it is set up to work as desired (set up IP addresses and functions, assigned drivers to ports, configured
digital input and user interface), the information is saved to a project configuration file that is built and uploaded
into the WC Pro 150 OCS.
The WC Pro 150 OCS integrates seamlessly with Extron GlobalViewer Enterprise (GVE) software and the
GlobalViewer web-based AV resource management tool for remote control applications when the unit is configured
with GCP configurator.
Bekijk gratis de handleiding van Extron WC Pro 150 OCS, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Extron |
| Model | WC Pro 150 OCS |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 8052 MB |
