Extron VSW 2VGA A handleiding
Handleiding
Je bekijkt pagina 2 van 12
2
VSW2VGAA • User Guide (Continued)
Features
• Inputs — Video on female 15-pin HD connectors, audio on 3.5 mm stereo mini jacks
• Outputs — Video on female 15-pin HD connectors, audio on 3.5 mm stereo mini jacks
• 300 MHz (-3 dB) RGB video bandwidth
• Compatible with VGA-QXGA and HDTV component video signals
• Buffered loop-through for input one
• ID bits from inputs 1 and 2 are routed to the output
• Auto-input switching — Automatically switches to the highest-numbered input with an active video signal.
• Contact closure remote control
• Front panel toggle switch for input selection
• Through-desk, under-desk, and projector-mountable
• 1U, quarter rack width metal enclosure
• External Extron Everlast power supply included — Provides worldwide power compatibility with high-demonstrated
reliability and low power consumption
• Extron Everlast Power Supply is covered by a 7-year parts and labor warranty
Installation Overview
To install and set up the VSW2VGAA for operation, follow these steps:
1. Turn all of the equipment off. Make sure that the video and audio sources (computers, stereos, DVD players, or other
devices), the VSW2VGAA, the output devices (projectors, speakers), and the contact closure control device are all turned off
and disconnected from the power source.
2. If you are going to daisy chain two or more switchers with VSWIAAP control panels, identify the revision of the VSW2VGAA
board (for conguring the VSWIAAPs) and congure the switcher jumpers (see Setting the VSW2VGAA Jumpers on
page4).
3. If desired, mount the switcher (see Mounting the VSW2VGAA on page9).
4. Attach the cables (see Front Panel Features below and Rear Panel Features on the next page).
5. Connect power cords and turn on the devices in the following order: output devices, contact closure controller, VSW2VGAA
switcher, and input devices.
6. Select an input using the front panel input toggle switch or the contact closure controller.
7. The image should now display, and sound should be audible. If not, ensure that all devices are plugged in and receiving
power. Check the cabling and make adjustments as needed. Select a different input to check for a picture and sound.
Front Panel Features
VSW 2VGA A
INPUT 1
2
1
INPUT 2
CC
BB
A
A
DDEEF
F
GG
Figure 2. VSW2VGAA Front Panel Features
A
Input 1 LED indicator — This LED lights green whenever Input 1 (video and audio) is selected.
B
Input 2 LED indicator — This LED lights green whenever Input 2 (video and audio) is selected.
NOTE: The LEDs also serve as power up indicators. When the switcher is powered up, the selected input LED lights.
C
Input select toggle switch — Toggle this switch up to select Input 1. Toggle it down to select Input 2.
D
Input 1 video — Input VGA-UXGA, RGBHV, RGBS, RGsB, RsGsBs, component video, or HDTV component video through
this female 15-pin VGA connector.
2
Bekijk gratis de handleiding van Extron VSW 2VGA A, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Extron |
| Model | VSW 2VGA A |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 2286 MB |
Caratteristiche Prodotto
| Kleur van het product | Zwart |
| Gewicht | 300 g |
| Breedte | 109 mm |
| Diepte | 76 mm |
| Hoogte | 25 mm |
