Handleiding
Je bekijkt pagina 16 van 39
8. Mounting the speaker.
a. Insert the speaker through the bottom of the hole in the ceiling tile that was cut in
step 3 on page5 with the wires out of the way.
b. Clamp the speaker to the C-ring by using a Phillips screwdriver to tighten the three
locking arms to the C-ring.
8W
1
6W
100 V
70 V
4W
2W
4
W
2
W
1
W
8
W
8
Ω
8
Ω
1
6W
8W
16W
100 V
4W
2W
8Ω
8Ω
Figure 10. Clamping the Speaker to the C-ring
Tightening the locking arms into rigid material:
Each of the three locking arm screws use an Opti-Torque indicator ring that snaps
and separates from its plastic ring when the screw is tightened to the correct
torque. The indicator ring falls down the screwdriver shaft. When this occurs, stop
tightening the screw to avoid overtightening the locking arms to the C-ring.
8W
16W
100 V
70 V
4W
2W
4W
2W
1W
8W
8Ω
8Ω
16W
8W
16W
100 V
4W
2W
8Ω
8Ω
Figure 11. Stop Tightening when the Opti-Torque Indictor Ring Falls
ATTENTION:
• To avoid damaging the speaker, do not overtighten the three screws.
• Pour éviter d’endommager l’enceinte, ne serrez pas trop les trois vis.
10
11
SF 3C LP and SF 3CT LP User Guide • Installation 10
Bekijk gratis de handleiding van Extron SF 3CT LP, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Extron |
| Model | SF 3CT LP |
| Categorie | Speaker |
| Taal | Nederlands |
| Grootte | 6313 MB |
Caratteristiche Prodotto
| Kleur van het product | Black, White |
| Gewicht | 1600 g |
| Breedte | 226 mm |
| Diepte | 226 mm |
| Hoogte | 112 mm |
