Extron RCP 101 Series handleiding

6 pagina's
PDF beschikbaar

Handleiding

Je bekijkt pagina 1 van 6
1
IMPORTANT:
Go to for the
complete user guide and installation
instructions before connecting the
product to the power source.
www.extron.com
gure 1
RCP 101 EU and RCP 101 MK • Setup Guide
Overview
NOTE: This product is for use only with Extron UL Listed Streaming Media Processor products.
The RCP 101 EU and RCP 101 MK are remote control panels with backlit transport controls for SMP series products. They carry
out the same functions as the SMP front panel transport controls and the USB type A port supports USB ash drives and external
USB portable drives.
The RCP 101 EU ts the opening in a 1-gang EU, Jung AS 500 wallplate, Extron Flex55 mounting system, or other European
frame that accepts 55 mm x 55 mm modules. The RCP 101 MK ts in a standard MK Wall Frame for United Kingdom junction
boxes. The units ship with a metal bracket that enable them to be mounted in the appropriate junction box. The RCP 101 EU also
ships with a metal spacer that can be used for Mounting the RCP 101 EU in a cable raceway (see page 5).
This guide provides basic instructions for an experienced installer to install either of these remote control panels and contains the
following sections:
RCP 101 Front Panel Features
RCP 101 Rear Panel Features
Installation
Configuration
Making a Recording
RCP 101 Front Panel Features
The front panel features of the RCP 101 EU and RCP 101 MK are identical apart from
the wallplate.
The recording controls have backlit buttons that indicate the current state of the
recording operation. Inactive buttons are backlit dimly to help identify them in low
ambient lighting.
A
Record button — Press this button to record one or more of the selected inputs.
The button lights red and remains lit during active recording. The button has a nub
that can be felt with the ngertips.
B
Activity LED — This LED blinks green once when a button press is detected. It
blinks red when a display or notify alarm on the attached SMP is triggered.
C
Stop button — Press this button to stop the active recording. As the recorded le
is nalized, the button blinks. Once the le is nalized, the button lights solidly.
D
Pause button — Press this button to pause the active recording. While the
recording is paused, this button blinks.
Press
Record or Pause to resume recording. Press Stop to end the recording.
E
Mark button — Press this button to place a chapter marking in the recorded le.
When pressed during active recording, the button momentarily blinks.
The button also lights when JPG thumbnails are created. By default, thumbnails
are created automatically and the interval between the creation of each thumbnail
can be changed by the user on the SMP embedded webpage.
F
USB storage port — Connect a USB compatible media storage device to this
port. This storage device can be any standard external hard drive or USB ash
drive formatted with a compatible le system.
NOTE: SMP models can detect and record to USB storage devices that use
FAT32, VFAT long le name extensions, EXT2, EXT3, EXT4 le system, or
NTFS-formatted storage volumes.
G
USB Storage LED — This LED indicates the status of the storage port:
It lights green solidly when the recording destination is set to RCP USB or
Auto and the attached storage device is ready for the next recording. The
LED does not turn on if less than 10 minutes of recording space remain on
the storage device.
It blinks green during a recording to indicate data transfer activity.
It turns off when no USB storage device is detected or the attached storage
is disconnected.
MARK
RECORD
USB STORAGE
Extron
RCP 101 EU
A
A
A
B
B
B
C
C
C
D
D
D
E
E
E
F
F
F
G
G
G
R
C
P 101 E
U
MARK
RECORD
USB STORAGE
Extron
RCP 101 MK
A
A
A
B
B
B
C
C
C
D
D
D
E
E
E
F
F
F
G
G
G
Figure 1. RCP 101 EU (top) and
MK (bottom) Front Panels

Bekijk gratis de handleiding van Extron RCP 101 Series, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.

Productinformatie

MerkExtron
ModelRCP 101 Series
CategorieNiet gecategoriseerd
TaalNederlands
Grootte1483 MB