Extron MLC Plus 84 handleiding
Handleiding
Je bekijkt pagina 13 van 58
MLC Plus 84 Series • Introduction 5
Device Control
The MLCPlus must be configured in one of the following ways before it can send
commands to a projector, display, or other device:
• An IR, RS-232, or Ethernet driver file can be downloaded from
the extensive Extron driver selection from the Extron website
(http://www.extron.com/download/index.aspx). The driver is saved to a folder
and commands from the driver are incorporated into the GC configuration file for the
controller. The configuration file is built and uploaded to the MLCPlus via GC.
• If a driver is not already available, RS-232 or Ethernet command strings can be
entered directly from a host computer using GlobalConfigurator. These can then be
incorporated into controls within the GC project.
See the Global Configurator Help File (which comes with the software) for details on setting
up the MLCPlus and for downloading, programming, or learning device control commands.
About Global Configurator (with GCProfessional and GCPlus Modes)
Use Extron Toolbelt software to discover and manage the MLCPlusSeries controller and
other Extron control products. Configure the controller using Extron Global Configurator
software running in Global Configurator Professional (GCProfessional) or Global
Configurator Plus (GC Plus) mode.
Global Configurator:
• Loads device drivers for monitoring the status of and controlling devices within the AV
system.
• Creates the configuration containing all the settings for the controller and the products
with which it interacts in the AV system.
• Uploads the configuration to the unit.
To obtain Extron control product software, you must have an Extron Insider account and
contact an Extron support representative. Extron provides training to our customers on how
to use the software. Access to Global Configurator Professional is available to users who
successfully complete Extron Control Professional Certification.
PC System Requirements
To find the minimum hardware and software requirements for the PC you use to configure
the MLCPlus84 Series:
• Visit the Download page (http://www.extron.com/download/index.aspx) on the
Extron website and navigate to web page for the specific software package (such as
Global Configurator). Minimum system requirements are listed in the description section.
In some cases, minimum device firmware version requirements are also listed there.
• If system requirements are not listed on the software package web page, contact an
Extron support representative.
• IR commands can be entered directly from an IR remote
control through IR learning via GC to create a driver that
the control processor can use. IR learning is seldom
needed, but it is convenient for installing new or updated
commands into the MLCPlus84Series in the field in
the rare cases when a driver is not already available from
Extron.
Rev. D, 08/2018:
Removed references
to Global Viewer, per
John Spencer.
Rev. D: replaced GC-
specific wording about
downloads w/generic
“Extron control product
software”.
Bekijk gratis de handleiding van Extron MLC Plus 84, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Extron |
| Model | MLC Plus 84 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 9928 MB |
