Extron MLC 64 RS VC D handleiding
Handleiding
Je bekijkt pagina 17 van 72
3. Attach the cables to the rear panel connectors of the MLC and to the display device
or switcher. Attach optional IR Emitters if used, and any switches or sensors needed
for other room devices, such as lights, a motorized screen, and so forth). See the
following sections as needed for cabling information:
• Rear Panel Features
• Wiring for RS-232 Control (RS Models Only)
• Wiring for IR Control
• Wiring the Relays Port (RS Models Only)
• Wiring the Digital Input Port (RS Models Only)
4. Wire and connect the MLC power supply (see Connecting Power to the MLC on
page 29). Connect all other power cords and turn on all the devices, including the
MLC.
5. Connect a configuration cable from the computer to the MLC by doing either of the
following:
• Connect a USB A to mini B cable to the MLC USB configuration port and to a
USB port on your computer (see Configuring the MLC via the USB Port on
page 29).
• Wire an RS-232 cable to the provided 3-pole connector, and connect the cable
between the MLC Remote port and the computer serial port (see Wiring the
Remote Port on page 27).
6. Download and install the MLC Configuration Program (see Downloading and
Installing the Configuration Software on page 46).
7. Download or create drivers for the devices you will be connecting (see Obtaining
Device Drivers on page 50 or IR Learning on page 33).
8. Configure the MLC buttons and ports using the configuration program. (See the
configuration program help file for these procedures. To access the help file, see
Downloading and Installing the Configuration Software).
If you are configuring via the USB port, remove the USB cable when you are finished.
9. Test the system: press the MLC buttons, watch the display, and listen to the audio
output to determine whether the connected devices are responding correctly
(powering on and off, switching inputs, and so forth). If not, ensure all devices are
plugged in and receiving power. Check the cabling and make needed adjustments.
10. Disconnect power from the MLC at the source and from all other devices in the
system.
11. Mount the MLC to the mounting surface, following the appropriate procedure for your
MLC model:
• For MLC 62 D models, see Mounting the MLC 62 D on page 34.
• For MLC 62 RS EU and MK models, see Mounting the MLC 62 RS EU and
the MLC 62 RS MK on page 38.
• For the MLC 64, see Mounting the MLC 64 RS VC D on page 36.
12. Restore power to the MLC and to the connected devices.
MLC 60 Series MediaLink Controllers • Features, Installation, and Operation 9
Bekijk gratis de handleiding van Extron MLC 64 RS VC D, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Extron |
| Model | MLC 64 RS VC D |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 12439 MB |
