Extron IPL EXP S5 handleiding
Handleiding
Je bekijkt pagina 9 van 49
IPL EXP I/O Series • Introduction 1
Introduction
This section covers the following basic information you should know about this guide and the product before
installation:
• Before You Begin
• About the IPL EXP Series
• Application Diagram
• Device Control
• About Global Configurator
• About Global Scripter and
ControlScript Programming Software
• PC System Requirements
Before You Begin
What This Guide Covers
This user guide provides instructions for an experienced installer to install an Extron IPL EXP I/O Series Control
System Expansion Interface. This guide provides detailed information and recommends best practices for cabling
the expansion interface. It provides a brief overview of the conguration process, and reference information.
Congure the expansion interface using Extron Global Congurator software running in Global Congurator
Professional (GC Professional) or Global Congurator Plus (GC Plus) mode, or program it using Global Scripter
or the ControlScript Deployment Utility. This guide does not contain instructions on detailed software-related setup
steps or details of conguration within the software: those are covered in the Global Congurator Help File, the
Global Scripter Help File, and help les for related programs. The software help les describe how to use each
program to download drivers, add AV devices to a conguration, congure basic functions, and set up schedules,
macros, e-mail alerts, touchpanel button congurations, and the like.
Conventions Used in This Guide
• Throughout this guide the IPL EXP I/O Series products are also referred to as the “IPL EXP,” “EXP,” or
“expansion interface.”
• IPCP Pro Q xi and xi Series control processors are also referred to as the “IPCP,” “IPCP Pro Q xi,”
“IPCP Pro xi,” or “control processor.” The xi models feature LAN ports, Q xi models feature both LAN and AV
LAN ports.
• Global Configurator software is referred to as “GC,” which can be run in Global Configurator Professional
mode (“GC Professional”) or Global Configurator Plus mode (“GC Plus”).
• Global Scripter is sometimes referred to as “GS.”
• ControlScript Deployment Utility is sometimes referred to as “CSDU.”
• ControlScript Pro xi includes ControlScript Deployment Utility (CSDU), ControlScript Extension, and Global
Scripter (GS).
• The GlobalViewer Enterprise application is sometimes referred to as “GVE.”
• Unless otherwise noted, in images of software or web pages, circled numbers correspond to the like-
numbered procedural steps.
Important Information You Need Before Installation
The order and types of setup tasks for the IPL EXP I/O expansion interfaces, and for the IPCP Pro xi Series
control processors and TouchLink Pro touchpanels and NBP button panels they work with, are important. Pay
close attention to them. Follow the setup checklist in the Hardware Features and Installation section starting on
page 6.
Rev. A, 08/04/21: During supervisor
review, Diane Orzepowski told me to
put these links into 2 columns and
move the “Important Information...”
section on this page.
Rev. D: Added
ControlScript
Deployment Utility.
Rev. B: Added reference
to the ControlScript
programming
software.
Rev. D: Updated or
added ControlScript
wording here and
elsewhere.
Bekijk gratis de handleiding van Extron IPL EXP S5, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Extron |
| Model | IPL EXP S5 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 7534 MB |
