Extron IPCP Pro 550 xi handleiding
Handleiding
Je bekijkt pagina 19 van 75
IPCP Pro Q xi and xi Series • Hardware Features and Installation 11
Configure or Program the Control Processor, Touchpanels, and Network Button Panels
• If TouchLink Pro touchpanels are part of the system, start and use GUI Designer to design, save, and
build the graphical user interface (GUI) layout for the touchpanels (see the GUI Designer Help File for
instructions).
NOTE: To redeem (activate) a LinkLicense, go to www.extron.com/llredeem and follow the online
instructions.
A LinkLicense unlocks features that add convenience, expand system options, and enhance the
capabilities of your Extron products. For IPCP Pro Q xi and xi systems, a LinkLicense allows you to
use a mobile device or computer as the primary control interface in an Extron control system where a
TouchLink Pro touchpanel may not be present.
• If using GC, create a new GC Professional or GC Plus project and configure the control processor and
other IP Link Pro devices. The configuration tells the control processor:
• How its ports function • What to monitor
• How to control other products • When to do things
• Which touchpanels to interact with • Whom to notify, how, and under what circumstances
• Configure ports on the control processor:
• Select device drivers and link them to each serial, IR/serial, or Ethernet port.
• Select settings (serial protocol, relay behavior, digital I/O or flex I/O settings, AC output settings) as
needed.
• Add eBUS devices and set them up:
• Ensure that the hardware address (eBUS ID) set on each device is distinct and matches the address
used in the configuration.
• Assign button functions as desired.
• Add Network Button Panels (NBPs) and set them up. Assign button functions as desired.
• Add and configure any IPL EXP expansion interfaces.
• Set up monitors, schedules, macros, and local variables.
• Add touchpanels and set them up:
• Upload the GUI Designer layout to the Global Configurator project.
• Assign any appropriate functions, monitors, or schedules to the touchpanels and their buttons.
• If not using GC Professional or GC Plus, use ControlScript programming software to program the
control system as desired.
• Program ports on the control processor:
• Program each serial, IR/serial, or Ethernet port.
• Program relay behavior, digital I/O, flex I/O, and AC output settings as needed.
• Add eBUS devices and set them up:
• Ensure that the hardware address set on each device is distinct and matches the addresses
programmed for them in the IPCP.
• Program button functions as desired.
• Add Network Button Panels (NBPs) and set them up. Assign button functions as desired.
• Add and configure any IPL EXP expansion interfaces.
Rev. E: Changed “configuration” to
“Designer layout” per Francisco Soto.
Rev. D: Added ControlScript
Deployment Utility.
Rev. E: Changed that from
Deployment Utility to
programming software.
Bekijk gratis de handleiding van Extron IPCP Pro 550 xi, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Extron |
| Model | IPCP Pro 550 xi |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 13260 MB |
