Extron IPCP Pro 355DR handleiding
Handleiding
Je bekijkt pagina 20 van 72
IPCP Pro Series • Hardware Features and Installation
12
• Save the project.
• Build and upload the system configuration to the control processor and other system devices.
Test and Troubleshoot
• Test the system (see the Troubleshooting section starting on page 55 for an outline of items to check
during system troubleshooting).
• Make adjustments to wiring or configuration as needed.
Network Communication Setup
Network setup is essential prior to conguration. Use the owchart as a general guide to setting up the control
processor for network use.
Open the Toolbelt software from within
Global Conÿgurator (GC Professional or
GC Plus mode) or as the stand-alone
application.
Start Device Discovery.
Toolbelt displays a list of all Extron control
devices connected to the network.
Using the MAC address, locate the desired
control processor in the list and select it.
Network Communication Setup
Connect the PC and the LAN port or AV LAN
port of the control processor to
the same network.
Apply power to all devices.
For each network interface
(LAN, or LAN and AV LAN), use the Set IP
feature in Toolbelt or use the
Toolbelt
Manage > Network Settings tab
feature to enter the IP address and
subnet address, then conÿgure other
network settings as needed.
Figure 7. Network Setup
NOTE: If using 802.1X security, see the Extron 802.1X
Technology Reference Guide and the Toolbelt Help
file for additional details on system setup.
Bekijk gratis de handleiding van Extron IPCP Pro 355DR, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Extron |
| Model | IPCP Pro 355DR |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 11958 MB |
