Extron IPCP Pro 250 xi handleiding
Handleiding
Je bekijkt pagina 12 van 75
IPCP Pro Q xi and xi Series • Introduction 4
Network and configuration features
• Global compatibility — The IPCP uses industry standard Ethernet communication protocols, including
DHCP, DNS, HTTP (redirect), HTTPS, ICMP, IEEE 802.1X, NTP, SFTP, SMTP, SNMP, SSH, TCP/IP, and
UDP/IP.
• Network switch — The IPCP Pro 350 xi, IPCP Pro355MQ xi, IPCP Pro 360Q xi, and IPCP Pro360MQ xi
include an unmanaged three port switch that supports 10Base-T up to gigabit (1000Base-T) Ethernet
communication. Connect any one of these ports to the network for communication with the IPCP. Connect the
other two ports to devices such as TouchLink Pro touchpanels and network-controlled AV devices.
• Support for a separate, dedicated AV network (AV LAN) — Some models (IPCP Pro 255Q xi,
IPCP Pro 355DRQ xi, IPCP Pro355MQ xi, IPCP Pro 360Q xi, IPCP Pro360MQ xi, IPCP Pro 555Q xi) feature
two network interfaces. The interface at the LAN port connects to the corporate network. The AV LAN network
interface is for dedicated control of AV devices so you can separate AV traffic from your primary corporate
network.
• Multi-level password protection — This allows security to be set based on user roles.
• Embedded web pages — The IPCP embedded web pages include online diagnostics and monitoring of
basic features.
• If the unit is configured to work with Extron Control, you can access the virtual user interfaces from a link
in the embedded web page.
• The AC power output port of the IPCP Pro PCS1 xi can also be managed (turned on or off) via its
embedded web page.
• Remote equipment management — The IP Link Pro connection allows you to remotely manage, monitor,
and control several Ethernet-enabled products such as projectors, cameras, video conferencing equipment,
switchers, and other AV equipment. The IPCP provides support for the following:
• TCP, UDP, and HTTP connections
• Password protection using secure communication
• Up to 32 (GC Professional) or 8 (GC Plus) Ethernet devices at a time depending on the configuration
mode
• Connection via IP address or host name
• System asset management — The configured system and control processor allow you to control, monitor,
and schedule various functions of devices in the system.
• E-mail notification — The IPCP can be set up to send e-mail notifications, such as a notice that a projector
has been disconnected or the projector lamp has been used for a designated number of hours.
• Additional security features — Each control processor can use the included Secure Sockets Layer (SSL)
certificate or a user-supplied, customized security certificate (see Secure Sockets Layer (SSL) Certificates
on page 61. IEEE 802.1X Authentication is also supported in our devices once enabled. For details see
IEEE 802.1X Certificates on page 62. These control processors also comply with NIAP security standards.
• Support for Extron ControlScript Pro xi.
Rev. E: Added the 355MQ xi
and 360MQ xi models.:
Rev. E: Added the 355MQ xi
and 360MQ xi models.:
Bekijk gratis de handleiding van Extron IPCP Pro 250 xi, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Extron |
| Model | IPCP Pro 250 xi |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 13260 MB |
