Extron FOX3 SR 301 handleiding
Handleiding
Je bekijkt pagina 33 van 58
FOX3SR 301 and FOX3SR311 Scaling Receivers • SIS Configuration and Control 25
Common symbol definitions
] = Carriage return/line feed
• = Space
} or | = Carriage return (no line feed)
E or W = Escape key
X!
= Video mute 0 = Unmute (default) 1 = Mute video only
2 = Mute video and sync
X@
= Audio output 1 = Digital (HDMI Out)
2 = Analog (Analog Output)
3 = All outputs (digital and return/analog)
X#
= Audio mute status 0 = Unmute (default), 1 = Mute
X$
= Input video signal status 0 = Not detected, 1 = Detected
X%
= Input audio status 0 = Not detected, 1 = Detected
X^
= Input HDCP status 0 = No source detected 1 = Source with HDCP detected (default)
2 = Source with no HDCP present
X&
= Output HDCP status 0 = No active sink detected
1 = Sink detected, output signal encrypted
2 = Sink detected, output signal not encrypted
X(
= Device type TX or RX
X1)
= Enable DHCP 0 = Off (default) 1 = On
X1!
= IP address, subnet, xxx.xxx.xxx.xxx
gateway address
X1@
= Baud rate 300 − 115200 baud (9600 default)
X1#
= Parity odd, even, none (default), mark, space
(only the first letter required)
X1$
= Data bits 7, 8 (default)
X1%
= Stop bits 1 (default), 2
X1^
= UARTs 1 = Endpoint
X1&
= Verbose mode 0 = Clear/none (default for Ethernet)
1 = Verbose mode (default for RS-232)
2 = Tagged response for queries
3 = Verbose mode and tagged responses for queries
X1*
= Active fiber link 1 = SFP A 2 = SFP B
X1(
= OSD duration Displays 1 to 500 seconds (default = 5 seconds), 501 = always on
X2)
= OSD location 1 = Top left (default) 4 = Bottom left
2 = Top right 5 = Bottom right
3 = Top center 6 = Bottom center
X2!
= OSD font size 24px 36px (default) 72px
X2$
= Scaler resolution 3‑digit response with 0 padding
(see Resolution table on page26)
X2%
= Aspect Ratio 1 = Fill (default) 2 = Follow
X2^
= Audio output volume Volume adjustment range 0% to 100%
(approximately 1 dB per step 0% to 100%, default 100%)
X2*
= Fiber link detection 0 = Not Detected 2 = Detected
X2(
= Fiber optic mode SM or MM
X3)
= Echo enable or disable 0 = Disabled 2 = Enabled
X3!
= Timeout The number of seconds before timeout on IP connections
(min=1, max=65000, with each number equivalent to 10 seconds
[default=30=300 seconds])
X3#
= View audio output 1 = Digital 2 = Analog
X3%
= Enable Telnet port 23 0 = Off (default) 23 = Telnet port 23 enabled
X3^
= Port number Response is 5 digits with leading zeros, for example 00000 or 00023
Bekijk gratis de handleiding van Extron FOX3 SR 301, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Extron |
| Model | FOX3 SR 301 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 10927 MB |
