Extron FOX II T HD 4K handleiding
Handleiding
Je bekijkt pagina 22 van 41
FOX II T HD 4K Transmitter • Remote Control 14
Remote Control
This section describes the remote control operation of the FOX II T HD 4K transmitter,
including:
• Simple Instruction Set Control
• Product Configuration Software
The transmitter has a front panel Configuration port, a USB mini-B connector (see Front
Panel Configuration Port on page 8) and a rear panel Remote RS-232 port, a 3-pole
captive screw connector (see item
F
on page 6 and RS-232 and IR connections on
page 9). Either of these ports can be connected to a host device such as a computer
running the HyperTerminal or DataViewer utility, or a control system to make remote control
of the transmitter possible.
The protocol for the serial port is as follows:
•
9600 baud
•
no parity
•
8 data bits
•
1 stop bit
•
no flow contr
ol
Simple Instruction Set Control
Host-to-Unit Instructions
SIS commands consist of one or more characters per field. No special characters are
required to begin or end a command character sequence. When a command is valid, the
unit executes the command and sends a response to the host device. All responses from
the unit to the host end with a carriage return and a line feed (CR/LF =
]
), which signals the
end of the response character string. A string is one or more characters.
Bekijk gratis de handleiding van Extron FOX II T HD 4K, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Extron |
| Model | FOX II T HD 4K |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 5917 MB |
