Extron DTP T UWP 4K 332 D handleiding
Handleiding
Je bekijkt pagina 19 van 38
Extron DTP T UWP 4K D Series • Installation and Operation 12
System Operation
After the transmitter, the receiver, and their connected devices are powered up, the system
is fully operational. If any problems are encountered, ensure all cables are routed and
connected properly.
NOTES:
• Ensure that the video source and display are properly connected to the transmitter
and receiver pair, and that the transmitter, the receiver, and the display have power
applied before power is applied to the video source. If all other devices are not
turned on before the video source, the image may not appear.
• Input switching can be performed only via auto switching, RS-232, USB, or
contact closure through the rear panel connectors.
Audio Configuration
The DTP T UWP 4K D series can embed analog audio inputs onto the digital video output.
Use Extron PCS software (available at www.extron.com) or SIS commands to select the
desired embedded audio mode.
NOTE: If no VGA or HDMI signal is present, analog audio will be transported over
the DTP connection to the analog audio output of the receiver.
When an input is selected, audio transport over HDMI can be configured to operate in one
of three modes. Each input can be configured individually for any of the three modes.
• Transport embedded digital audio (default) — The embedded digital audio
content on the digital video input is transported. Analog audio is still separate from the
embedded digital audio on the HDMI signal and transported simultaneously over the
DTP output, not embedded onto the digital output.
• Embed analog audio input — The analog audio input is always embedded to the
digital output, replacing whatever content is already present on the embedded digital
audio. Analog audio is also transported over the DTP output as a simultaneous output.
• Auto select between analog audio and digital audio — When both analog audio
and embedded digital audio on HDMI are present, embedded digital audio on the HDMI
signal takes priority. Analog audio is transported simultaneously with the embedded
digital audio content that is already present on the DTP output.
EDID Minder
EDID Minder ensures that source devices connected to the DTP T UWP 4K D inputs
continually recognize the EDID of a sink device, even if a sink is not physically connected.
By default, the EDID on the VGA input is configured for 1920x1080 @ 60 Hz, and the EDID
on the HDMI input is configured for 1080p @ 60 Hz with 2-channel audio.
EDID can be configured further using PCS software (see EDID Minder on page 23).
Bekijk gratis de handleiding van Extron DTP T UWP 4K 332 D, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Extron |
| Model | DTP T UWP 4K 332 D |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 5856 MB |
Caratteristiche Prodotto
| Kleur van het product | Zwart |
| Gewicht | 200 g |
| Breedte | 89 mm |
| Diepte | 48 mm |
| Hoogte | 69 mm |
